Share on Facebook
Tweet
Send email
S&P SISTEMAS DE VENTILACIÓN, S.L.U.
Llevant, 4
Polígono Industrial Llevant
08150 Parets del Vallès
Barcelona – Spain
consultas[zav]solerpalau[teč]com
www.solerpalau.com/en-en/home
Product description
Cabinet
is made of durable hardened white plastic. The inner construction is made of high quality EPP guaranteeing airtightness. On the rear side of the unit there are 2 Ø 100 mm throats for fresh air intake and exhaust of polluted air. On the upper side there are 2 openings for the fresh air inlet and the exhaust of the polluted air from the interior (see installation options below).
Fans
The unit is equipped with radial fans with backward curved blades.
Motors
are single-phase EC 230 V / 50 Hz.
Recuperation
The TURAIS unit is equipped with a counter-flow plastic plate heat exchanger that achieves a ZZT efficiency of up to 94%. The variant with an enthalpy plate heat exchanger achieves a ZZT efficiency of up to 89% and a ZZV efficiency of up to 84%. The exchanger is accessible by removing the front panel.
Filters
The unit is fitted with G4 class filters (ISO coarse 65%) on the fresh air intake and exhaust side. As an option, an F7 filter (ISO ePM1 70%) can be fitted on the fresh air intake.
Mounting
The unit is designed for vertical indoor installation. The mounting options are as follows:
- wall installation
- semi-recessed installation
- recessed installation
Electrical connection
A three-core 230 V / 50 Hz power cable is routed from the unit.
Regulation
The unit has a fully automatic mode, which, based on the integrated humidity sensor, ensures smooth speed regulation without the need for any further intervention in the unit control. It is also possible to control the unit manually. The manual mode allows the ventilation intensity to be set in 4 stages, which are guaranteed by constant flow fans. In addition, the unit can be controlled remotely using the CONNECTAIR application (TUR-SPCM module required) or using wireless air quality sensors of the AIRSENS RF series (installation of TUR-RC-A RF required to manage devices using radio frequency signals). The unit is supplied in the basic version without a controller.
Noise
The tables show the sound power level at the enclosure.
Information
Local ventilation unit with heat recovery designed for new buildings and renovations of family and apartment houses. It features unobtrusive installation that can be integrated into the masonry, with the possibility of connecting multiple rooms, unlike push-pull local ventilation units.
Accessories
TUR-MBS EPS box for unit (semi-recessed installation)
TUR-MBM EPS box for unit (recessed installation)
TUR-LID closure lid and rubber gasket
TUR-WDP front cover for EPS box cover
TUR-MBEF additional insulation for EPS boxes
TUR-ADD75 duct connector
TUR-AD1155 set of 2 adapters for connection of square duct
TUR-OCW 2 white facade grids
TUR-OCA 2 anthracite facade grids
TUR-PH built-in preheater
BFC 90/75 plug
TUR-RC-A RF set of wireless controller and antenna
TUR-SPCM communication module
Parameters
| Základní údaje | |
|---|---|
| Version | Wall |
| Exchanger | Plate enthalpy |
| Maximum air flow | 100 m³/h |
| Weight | 12,00 kg |
| Připojení | |
| Diameter of the connection throats | 100 mm |
| Elektrické parametry | |
| Power supply | 230 V |
| Ingress Protection | IP21 |
| Engine type | EC |
| Maximum power input | 37 W |
| Maximum current | 0,17 A |
| Vybavení | |
| Boost | Yes |
| Control according to control voltage 0-10 V | Yes |
| Integrated RH sensor for automatic unit operation | Yes |
| Remote management via mobile app/web interface | Yes |
Adherence to these instructions should not pose any safety, health or environmental risks in accordance with EC directives (CE marked). The same applies to other products used in the device or during installation. Consider the following warnings:
• Observe the safety instructions to prevent damage to the device or personal injury.
• The technical information in this manual must not be changed.
• It is forbidden to interfere with the motor of the device.
• In order for the device to comply with EC directives, the device must be connected to the mains in accordance with the applicable regulations.
• The device must be installed in such a way that under normal operating conditions it cannot come into contact with any moving part and / or live part.
• The device complies with the applicable regulations for the operation of electrical equipment.
• Always disconnect the device from the power supply before carrying out any work on it.
• Appropriate tools must be used when handling or maintaining the device.
• The device must only be used for the purposes for which it is intended.
• This appliance is not intended for use by children under 8 years of age and persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a responsible person. The user must ensure that children do not play with the device. Cleaning and maintenance of the appliance must not be carried out by children without supervision.
