Share on Facebook
Tweet
Send email
S&P SISTEMAS DE VENTILACIÓN, S.L.U.
Llevant, 4
Polígono Industrial Llevant
08150 Parets del Vallès
Barcelona – Spain
consultas[zav]solerpalau[teč]com
www.solerpalau.com/en-en/home
Product description
Casing
is welded from corrosion-resistant sheet steel with a hot-dip galvanised finish, and features flanges for connection to circular ducting. The fan is certified in accordance with ČSN EN 12 101-3 as a device suitable for heat and smoke extraction.
Impeller
is made of an aluminium alloy and is statically and dynamically balanced. From size 710 onwards, it features a steel hub. The angle of the impeller blades is set by the manufacturer; the possible angles of rotation are specified in the performance characteristics.
Motor
is an induction motor with a short-circuited rotor. The motors are three-phase for a voltage of 230/400 V up to a power rating of 3 kW, and three-phase for a voltage of 400 V for higher power ratings and dual-speed motors. Operating temperature for ventilation up to 40 °C; in the event of a fire, in accordance with classification F400(120); F300 / F200 (120) available on request. Motor protection rating IP55, insulation class H. Efficiency class IE3.
Terminal block
Internal as standard for the short housing, external for the long housing. External terminal block for the short housing and service door for the long housing available to order.
Speed control
Fan speed control is not possible in smoke and heat extraction mode. In operational ventilation mode, speed control is possible via a frequency converter. Observe the specifications on the electric motor nameplate.
Flow direction
is by default from the impeller to the motor (i.e. direction B; from the motor to the impeller is direction A).
Instructions
The fans are suitable for ventilation applications and are particularly advantageous where high airflow is required from the fans and, at the same time, the fan is required to function for heat and smoke extraction.
Note
During installation and design, all the manufacturer’s recommendations must be followed; these are identical to those for TGT axial fans in terms of performance parameters.
Parameters
| Základní údaje | |
|---|---|
| Motor type | AC |
| Installation | Pipeline |
| Fire resistance | F400 (120) |
| Fan type | Axial |
| Připojení | |
| Diameter of the suction connection pipe | 560 mm |
| Diameter of the discharge connection pipe | 560 mm |
| Elektrické parametry | |
| Power supply | 400 V |
| Ingress Protection | IP55 |
| Maximum power consumption | 8 000 W - 2 000 W |
| Maximum current | 15,30 A - 4,80 A |
| Další | |
| Max. air temperature | 40 °C |
| Weight | 126,00 kg |
| Maximum speed | 2 950 min⁻¹ - 1 500 min⁻¹ |
| Doplňkové parametry | |
| Ball bearings | Ano |
Adherence to these instructions should not pose any safety, health or environmental risks in accordance with EC directives (CE marked). The same applies to other products used in the device or during installation. Consider the following warnings:
• Observe the safety instructions to prevent damage to the device or personal injury.
• The technical information in this manual must not be changed.
• It is forbidden to interfere with the motor of the device.
• In order for the device to comply with EC directives, the device must be connected to the mains in accordance with the applicable regulations.
• The device must be installed in such a way that under normal operating conditions it cannot come into contact with any moving part and / or live part.
• The device complies with the applicable regulations for the operation of electrical equipment.
• Always disconnect the device from the power supply before carrying out any work on it.
• Appropriate tools must be used when handling or maintaining the device.
• The device must only be used for the purposes for which it is intended.
• This appliance is not intended for use by children under 8 years of age and persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a responsible person. The user must ensure that children do not play with the device. Cleaning and maintenance of the appliance must not be carried out by children without supervision.
