Share on Facebook
Tweet
Send email
S&P SISTEMAS DE VENTILACIÓN, S.L.U.
Llevant, 4
Polígono Industrial Llevant
08150 Parets del Vallès
Barcelona – Spain
consultas[zav]solerpalau[teč]com
www.solerpalau.com/en-en/home
Cabinet
It is welded from steel sheet, with flanges for connecting circular pipes, coated with black polyester paint. Brackets and screws are electroplated.
Running wheels
are made of Al alloy, the wheels are statically and dynamically balanced, the operating temperature range is from -40 to +70 ˚C. The rotation of the blades is fixed and cannot be changed. The impellers are in counter-rotating design, the impellers are specially optimized for this fan and cannot be commonly replaced by impellers from TCB fans.
Motors
are asynchronous with short armature. TCBBx2 fan motors are 1-phase for 230 V, TCBTx2 are 3-phase for 230/400 V or 3-phase for 400 V. The motors are equipped with a thermal fuse as standard, the windings are insulated to class F. Operating temperature -40 ˚C to +70 ˚C. Grease-filled ball bearings for life. IP65 protection.
Square box
is located on the fan housing and contains the outlets from both motors.
Speed control
is performed by frequency converters. Speed control is not possible with the TCBBx2/4-560 and TCBBx2/4-630 fans.
Flow direction
is always in the direction of the arrow on the fan housing, the flow direction cannot be changed.
Noise
emitted by the fan is tabulated, measurements are taken at a distance equal to three times the impeller diameter (but at least 1.5 m) in the free acoustic field.
Mounting
of the fans at each position of the motor axis.
Instructions
Fans are suitable for piping systems in industrial and special applications with high pressure drop and where a very compact fan shape is applicable.
By following the instructions in the manual, no risk should arise regarding safety, health and the environment in accordance with the EC Directives (with CE marking). The same applies to other products used in the equipment or during installation. Please consider the following general information important:
- observe the safety instructions to avoid damage to the equipment or personal injury
- the technical information given in these instructions must not be altered
- it is forbidden to interfere with the equipment's motor
- in order to comply with the EC directives, the equipment must be connected to the mains in accordance with the applicable regulations
- the equipment must be installed in such a way that, the equipment must comply with the applicable regulations for the operation of electrical equipment
- it must always be disconnected from the power supply before any tampering with the equipment
- appropriate tools must be used when handling or maintaining the equipment
- the equipment must only be used for the following purposes, for which it is intended
- this appliance must not be used by children under the age of 8 years and by persons with reduced physical, sensory or mental abilities, or persons with a lack of experience and knowledge, unless they are supervised by a responsible person or have been adequately instructed in the safe use of the appliance and can understand the risks involved
- the user must ensure that children do not play with the appliance
- cleaning and maintenance of the appliance must not be carried out by unsupervised children
