SILENT ECO U 60 H IPX5 small centrifugal fan

Small radial fans suitable for very demanding interiors, architectural solutions and for extracting odours directly from sanitary ware.
Read more
B2B clients will see their prices after logging in
8 211,00 CZK excl. VAT
9 935,31 CZK incl. VAT
Availability: In stock [8.8.2025, 04:10] Update

Product code: WG164100010
Product description
Cabinet

The cabinet is made of ABS, colour white RAL 9016. ECO-A has a rearward outlet for a pipe diameter of 78 mm. ECO-U has a rearward (Z) or upward (H) outlet for a pipe diameter of 75-80 mm. ECO-A F90 has a rearward outlet for a diameter of 100 mm. There is a check valve on the discharge. Installation is on the wall, flush or in the ceiling. The front grille includes a filter and silencer.

Running wheel

The impeller is radial with forward curved blades, press-fitted to the outer rotor.

Motor

The motor is asynchronous with external rotor, high efficiency and low power consumption. The motor has ball bearings and is equipped with thermal overload protection, max. ambient temperature is 40 ˚C. IPX5 protection.

Square box

The terminal box is accessible by removing the front grille in the fan housing.

Speed control

Speed control is performed by electronic controllers. Two-speed fans ECO-U GL, ECO-A GL are also available.

Variants

- Z - rear outlet (only U-plastered version)
- H - top outlet (only U-plastered version)
- GL- two-speed version
- F90 - fireproof version

Mounting

The ECO-U is installed flush or in the ceiling, in horizontal and vertical position. The extension for extraction of ancillary spaces can be positioned on three sides of the enclosure as required, see illustration. The fan is supplied assembled, the cabinet is covered with a temporary anti-fouling lid and is replaced with a loose-fitting faceplate after installation. The cabinet, motor, fan and faceplate can be supplied separately on special order. The inaccuracy of the brickwork can be compensated by rotating the faceplate by up to approx. 10˚. ECO-A is mounted on the wall or on the ceiling.

Accessories

The U version does not include an extension for extraction of adjacent spaces, to be ordered separately.

Instructions

The fans are suitable for very demanding interiors, architectural designs and for extracting odours directly from sanitary ware.

Full description
Safety regulations

Adherence to these instructions should not pose any safety, health or environmental risks in accordance with EC directives (CE marked). The same applies to other products used in the device or during installation. Consider the following warnings:

• Observe the safety instructions to prevent damage to the device or personal injury.
• The technical information in this manual must not be changed.
• It is forbidden to interfere with the motor of the device.
• In order for the device to comply with EC directives, the device must be connected to the mains in accordance with the applicable regulations.
• The device must be installed in such a way that under normal operating conditions it cannot come into contact with any moving part and / or live part.
• The device complies with the applicable regulations for the operation of electrical equipment.
• Always disconnect the device from the power supply before carrying out any work on it.
• Appropriate tools must be used when handling or maintaining the device.
• The device must only be used for the purposes for which it is intended.
• This appliance is not intended for use by children under 8 years of age and persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a responsible person. The user must ensure that children do not play with the device. Cleaning and maintenance of the appliance must not be carried out by children without supervision.

Downloads
Technical sheets, manuals and declarations
Catalogue sheet .pdf (552.25 kB)
Operating Instructions .pdf (1.89 MB)
CAD files
2D .dwg (70.05 kB)
3D .dwg (61.55 kB)
2D .dxf (58.10 kB)
3D .dxf (75.37 kB)
Contact Us