Share on Facebook
Tweet
Send email
S&P SISTEMAS DE VENTILACIÓN, S.L.U.
Llevant, 4
Polígono Industrial Llevant
08150 Parets del Vallès
Barcelona – Spain
consultas[zav]solerpalau[teč]com
www.solerpalau.com/en-en/home
Cabinet
The fan frame is made of aluminium profiles, the panels are made of galvanized steel.
Iris wheel
The fan is radial with backward curved blades, made of galvanized steel sheet. It is statically and dynamically balanced.
Motor
DC special EC motor with external rotor, 1-phase for 230 V. The motors are equipped with a thermal fuse as standard. Consult for the use of protective elements on motors in case of fire ventilation. Motor insulation is class F, motor operating temperature -10 to +40 ˚C. The motor has grease-filled ball bearings for life. Protection rating IP55.
Square box
With revision switch is located on the fan housing. The protection is IP55.
Mounting
in any position of the fan, preferably with the motor axis vertical or horizontal with respect to the revision operation. When using a motor cover, the fan is also suitable for outdoor mounting.
Speed control
is carried out by means of a potentiometer located in the terminal block or by an external REB Ecowatt control. Another option is to control using a 0-10 V control signal from a temperature, humidity or CO2 sensor. The fans can be controlled via the ModBUS RTU communication protocol, RS485 port.
Rotation direction
is indicated by an arrow stuck on the cabinet.
Options
- MV standard version
- CC integrated suction plenum
- ILHB/T Ecowatt VAV
- ILHB/T Ecowatt VAV with display
- ILHB/T Ecowatt COP
- ILHB/T Ecowatt COP with display
- ILHB/T Ecowatt CAV with display
Instructions
The fans are suitable for more demanding applications (professional kitchens, industry) due to their higher operating temperature (120 °C) and performance characteristics. If the fan is operated in heat and smoke extraction mode, speed control is not permitted and safety protections such as thermocontacts must be disabled.
Adherence to these instructions should not pose any safety, health or environmental risks in accordance with EC directives (CE marked). The same applies to other products used in the device or during installation. Consider the following warnings:
• Observe the safety instructions to prevent damage to the device or personal injury.
• The technical information in this manual must not be changed.
• It is forbidden to interfere with the motor of the device.
• In order for the device to comply with EC directives, the device must be connected to the mains in accordance with the applicable regulations.
• The device must be installed in such a way that under normal operating conditions it cannot come into contact with any moving part and / or live part.
• The device complies with the applicable regulations for the operation of electrical equipment.
• Always disconnect the device from the power supply before carrying out any work on it.
• Appropriate tools must be used when handling or maintaining the device.
• The device must only be used for the purposes for which it is intended.
• This appliance is not intended for use by children under 8 years of age and persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a responsible person. The user must ensure that children do not play with the device. Cleaning and maintenance of the appliance must not be carried out by children without supervision.
