Share on Facebook
Tweet
Send email
S&P SISTEMAS DE VENTILACIÓN, S.L.U.
Llevant, 4
Polígono Industrial Llevant
08150 Parets del Vallès
Barcelona – Spain
consultas[zav]solerpalau[teč]com
www.solerpalau.com/en-en/home
Cabinet
The cabinet is made of impact-resistant plastic, the colour is white. The fan is equipped with a return shutter, manually operated in the case of the M type, and electrically operated in the case of the AE, A and RC types at the same time when the fan is switched on. The model is equipped with operation lights.
Running wheel
The impeller is axial made of high quality impact resistant plastic. It has aerodynamically and performance optimized blades. The impeller is secured on the shaft by a central anti-slip screw.
Motor
The motor is asynchronous with auxiliary phase in the version with external rotor. The motor has sealed ball bearings with grease packing for life. IPX4 protection. Double insulated design with thermal protection.
Flow direction
Flow direction is from impeller to stator, flow can be changed by pull cord controller on M model, by controller on AE and A models, by remote wireless control on RC model.
Clamp-on control unit
The terminal box is accessible by removing the front fan grille. Connection is via a concealed or flush-mounted cable. The terminal block includes a relief clip to prevent the cable from being pulled out.
Noise
The table shows the sound pressure values at the point (B - Fig. measurement of acoustic parameters), at a distance of 3 m, for a mounted fan. The table gives the correction values to obtain the LWA sound power at the mid frequencies of the octave bands for the intake (A) and discharge.
Mounting
Mounting is carried out in a single or double glazed window with a thickness of 3 to 25 mm. Using 3 screws, the fan can be mounted as a wall fan for supply or extract air through the wall. Installation is possible in walls with a thickness of 25 to 300 mm.
Instructions
The fans are suitable for short ducts with very low pressure drop or for ventilation directly through a wall or window. Fans can be used for ventilation in residential construction, public rooms, offices, shops and restaurants.
Adherence to these instructions should not pose any safety, health or environmental risks in accordance with EC directives (CE marked). The same applies to other products used in the device or during installation. Consider the following warnings:
• Observe the safety instructions to prevent damage to the device or personal injury.
• The technical information in this manual must not be changed.
• It is forbidden to interfere with the motor of the device.
• In order for the device to comply with EC directives, the device must be connected to the mains in accordance with the applicable regulations.
• The device must be installed in such a way that under normal operating conditions it cannot come into contact with any moving part and / or live part.
• The device complies with the applicable regulations for the operation of electrical equipment.
• Always disconnect the device from the power supply before carrying out any work on it.
• Appropriate tools must be used when handling or maintaining the device.
• The device must only be used for the purposes for which it is intended.
• This appliance is not intended for use by children under 8 years of age and persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a responsible person. The user must ensure that children do not play with the device. Cleaning and maintenance of the appliance must not be carried out by children without supervision.
