Share on Facebook
Tweet
Send email
S&P SISTEMAS DE VENTILACIÓN, S.L.U.
Llevant, 4
Polígono Industrial Llevant
08150 Parets del Vallès
Barcelona – Spain
consultas[zav]solerpalau[teč]com
www.solerpalau.com/en-en/home
Product description
Cabinet
It is designed for horizontal air exhaust for CTHT type, for vertical air exhaust for CTVT type. The base of the fan is made of galvanized steel sheet, the brackets, grille and screws are also electroplated. The fan shroud and casing are made of Al sheet metal. The fan motor is mounted outside the air flow. The motor ventilation circuit is separate, using its own radial impeller. There is a ventilation joint around the perimeter of the cowling on the CTHT fan, on the CTVT type the motor ventilation is led out of the side of the casing.
Impeller
The fan is radial with backward curved blades. It is made of galvanized steel sheet and is statically and dynamically balanced.
Motor
is asynchronous with shorted resistance armature, stator with cooling fins, black epoxy lacquer finish. Motors are 3-phase for 230/400 V. PTC thermistors on request. The windings are tropicalised with class F insulation and a permanent operating temperature of -40 to +120 °C. Grease-filled ball bearings for life. Protection rating IP55.
Square box
Accessible by removing the fan canopy. The protection is IP55.
Speed control
is performed by frequency converters.
Rotation direction
is only possible in one direction, as indicated by the arrow on the fan housing. The opposite direction of rotation can cause motor overload, and the fan will also experience increased noise.
Mounting
The fan is mounted horizontally using the accessories (with the motor axis vertical).
Noise
Emitted by the fan is measured in the free acoustic field at a distance of 3 m at 2/3 of the maximum air power.
Instructions
The fans are suitable for general air handling applications.
Parameters
| Základní údaje | |
|---|---|
| Fan type | radial |
| Mounting | Roof |
| Weight | 75,00 kg |
| Max. air temperature | 120 °C |
| Připojení | |
| Connection pipe diameter | 500 mm |
| Elektrické parametry | |
| Power supply | 230/400 V |
| Ingress Protection | IP55 |
| Engine type | AC |
| Maximum power input | 709 W |
| Maximum current | 3,10 A |
| Regulatability | Ano |
| Vybavení | |
| Equipment | Kuličková ložiska |
| Další | |
| Maximum speed | 970 min⁻¹ |
Adherence to these instructions should not pose any safety, health or environmental risks in accordance with EC directives (CE marked). The same applies to other products used in the device or during installation. Consider the following warnings:
• Observe the safety instructions to prevent damage to the device or personal injury.
• The technical information in this manual must not be changed.
• It is forbidden to interfere with the motor of the device.
• In order for the device to comply with EC directives, the device must be connected to the mains in accordance with the applicable regulations.
• The device must be installed in such a way that under normal operating conditions it cannot come into contact with any moving part and / or live part.
• The device complies with the applicable regulations for the operation of electrical equipment.
• Always disconnect the device from the power supply before carrying out any work on it.
• Appropriate tools must be used when handling or maintaining the device.
• The device must only be used for the purposes for which it is intended.
• This appliance is not intended for use by children under 8 years of age and persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a responsible person. The user must ensure that children do not play with the device. Cleaning and maintenance of the appliance must not be carried out by children without supervision.
