Share on Facebook
Tweet
Send email
S&P SISTEMAS DE VENTILACIÓN, S.L.U.
Llevant, 4
Polígono Industrial Llevant
08150 Parets del Vallès
Barcelona – Spain
consultas[zav]solerpalau[teč]com
www.solerpalau.com/en-en/home
Cabinet
is designed for vertical air exhaust. The fan base is made of galvanized steel sheet, the brackets, grille and screws are also electroplated. The fan shroud and casing are made of Al sheet metal. The fan motor is mounted in the air stream. Protective grille against contact.
Running wheel
is radial with backward curved blades. It is made of galvanized steel sheet, is statically and dynamically balanced.
Motor
is a DC, special EC, with an external rotor for 230 V/50 Hz (CRVB) or 400 V/50 Hz (CRVT) supply. Permanent operating temperature -20 to +40 °C. Grease-filled ball bearings for life. Protection rating IP44 (CRVB) or IP54 (CRVT).
Rotation direction
is only possible in one direction, in the sense of the arrow on the fan housing. The fan control does not allow changing the direction of rotation.
Fan box
with a revision switch is located on the fan housing. The internal terminal block has connection terminals for speed control, sensor controlled control and for setting and reading operating values. The protection rating is IP55.
Speed control
The fan can be operated in 4 basic modes switchable by setting the switches on the control unit board. The first mode maintains a constant duct pressure based on an integrated sensor. The other modes allow continuous automatic control to constant air flow, proportional mode or ventilation mode with 2 switchable min/max operating characteristics. The control unit allows connection of signals from external devices (CO2, temperature and relative humidity sensors), external pressure sensor with transducer and 0-10 V or 4-20 mA output. The control allows control via Modbus-RTU. The SPCM-WS Ecowatt Plus module allows you to connect your phone to WiFi and easily set up the fan using the web app. The module is not included.
Options
CRVB-N1 Ecowatt Plus - the system is based on the use of modern elements for DCV systems (demand controlled ventilation). These are fans with microprocessor control, built-in differential pressure sensor, EC motor (electronically commutated), electrically controlled exhaust plate valves, CO2 sensors, relative humidity sensors, programmable time switches for controlling exhaust plate valves.
CRVB-N Ecowatt - A simpler fan design with EC motor, the fan does not include a constant pressure or flow control module. The fan is controlled only by a 0-10 V (K 1.6) control voltage.
Noise
The noise emitted by the fan is listed in the tables. The values are measured at a distance of 4 m on the discharge side in the horizontal direction.
Caution
Inquire about the permitted combinations of electrical accessories.
Commissioning
Expert installation and commissioning assistance is available for this product.
Adherence to these instructions should not pose any safety, health or environmental risks in accordance with EC directives (CE marked). The same applies to other products used in the device or during installation. Consider the following warnings:
• Observe the safety instructions to prevent damage to the device or personal injury.
• The technical information in this manual must not be changed.
• It is forbidden to interfere with the motor of the device.
• In order for the device to comply with EC directives, the device must be connected to the mains in accordance with the applicable regulations.
• The device must be installed in such a way that under normal operating conditions it cannot come into contact with any moving part and / or live part.
• The device complies with the applicable regulations for the operation of electrical equipment.
• Always disconnect the device from the power supply before carrying out any work on it.
• Appropriate tools must be used when handling or maintaining the device.
• The device must only be used for the purposes for which it is intended.
• This appliance is not intended for use by children under 8 years of age and persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a responsible person. The user must ensure that children do not play with the device. Cleaning and maintenance of the appliance must not be carried out by children without supervision.
