Share on Facebook
Tweet
Send email
S&P SISTEMAS DE VENTILACIÓN, S.L.U.
Llevant, 4
Polígono Industrial Llevant
08150 Parets del Vallès
Barcelona – Spain
consultas[zav]solerpalau[teč]com
www.solerpalau.com/en-en/home
Cabinet
It is made of galvanized steel sandwich sheet with 25 mm thick insulation. The individual panels can be removed for inspection and cleaning. The fan is mounted in the enclosure on sprung profiles to reduce vibration transmission. Circular sockets are screwed onto the housing for connecting flexible hoses or circular pipework. The individual panels are interchangeable with the discharge panel. The fan is certified according to EN 12 101-3 as suitable for heat and smoke extraction, classification F400 (120).
Running wheel
Traditional with backward curved blades. It is statically and dynamically balanced, freely circulating and without spiral casing.
Motor
is asynchronous with a short armature. The motors are 3-phase for 230/400 V. Operating temperature up to 70 °C. Sealed and maintenance free ball bearings with grease cartridge for life. IP55 protection, insulation class H. Two-speed fan version 4/8 on request.
Square box
is located directly on the fan motor and is accessible by removing the side covers of the enclosure.
Mounting
with regard to fan operation, inspection activities and the possibility of removing the side panel exclusively with the motor axis horizontal.
Noise
The acoustic pressure emitted by the fan is indicated in the table of technical parameters and is measured in the free acoustic field at a distance of 1.5 m from the inlet and discharge. The sound power values are in a separate table.
Instructions
The fans are suitable for air handling applications where low fan noise is advantageous and there is a requirement for the fan to function as a fire ventilation fan.
Adherence to these instructions should not pose any safety, health or environmental risks in accordance with EC directives (CE marked). The same applies to other products used in the device or during installation. Consider the following warnings:
• Observe the safety instructions to prevent damage to the device or personal injury.
• The technical information in this manual must not be changed.
• It is forbidden to interfere with the motor of the device.
• In order for the device to comply with EC directives, the device must be connected to the mains in accordance with the applicable regulations.
• The device must be installed in such a way that under normal operating conditions it cannot come into contact with any moving part and / or live part.
• The device complies with the applicable regulations for the operation of electrical equipment.
• Always disconnect the device from the power supply before carrying out any work on it.
• Appropriate tools must be used when handling or maintaining the device.
• The device must only be used for the purposes for which it is intended.
• This appliance is not intended for use by children under 8 years of age and persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a responsible person. The user must ensure that children do not play with the device. Cleaning and maintenance of the appliance must not be carried out by children without supervision.
