Share on Facebook
Tweet
Send email
S&P SISTEMAS DE VENTILACIÓN, S.L.U.
Llevant, 4
Polígono Industrial Llevant
08150 Parets del Vallès
Barcelona – Spain
consultas[zav]solerpalau[teč]com
www.solerpalau.com/en-en/home
Cabinet
It is made of sheet steel, electroplated, coated with grey polyester varnish.The motor is located outside the airflow on the outside of the cabinet. In order to clean the fan without removing the ductwork, the impeller drive unit can be tilted outwards, off the duct axis.
Iris wheel
is cast entirely in Al alloy. The impeller is statically and dynamically balanced and has an epoxy lacquer finish. The impeller is driven by a belt, which is in a protective cover.
Motor
is asynchronous, short armature, with F class insulation, with grease-filled ball bearings for life. Motors are 3-phase for 230/400 V or 3-phase for 400 V. The motor has its own cooling fan. Protection rating IP55.
Square box
is included with the motor. IP55 protection.
Rotation direction
is marked with an arrow on the fan housing.
Mounting
of the fan, taking into account the life of the bearings in the horizontal position.
Instructions
Fans are suitable for extraction of hot gases in industrial applications. Please request information on delivery conditions.
Adherence to these instructions should not pose any safety, health or environmental risks in accordance with EC directives (CE marked). The same applies to other products used in the device or during installation. Consider the following warnings:
• Observe the safety instructions to prevent damage to the device or personal injury.
• The technical information in this manual must not be changed.
• It is forbidden to interfere with the motor of the device.
• In order for the device to comply with EC directives, the device must be connected to the mains in accordance with the applicable regulations.
• The device must be installed in such a way that under normal operating conditions it cannot come into contact with any moving part and / or live part.
• The device complies with the applicable regulations for the operation of electrical equipment.
• Always disconnect the device from the power supply before carrying out any work on it.
• Appropriate tools must be used when handling or maintaining the device.
• The device must only be used for the purposes for which it is intended.
• This appliance is not intended for use by children under 8 years of age and persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a responsible person. The user must ensure that children do not play with the device. Cleaning and maintenance of the appliance must not be carried out by children without supervision.
