Share on Facebook
Tweet
Send email
S&P SISTEMAS DE VENTILACIÓN, S.L.U.
Llevant, 4
Polígono Industrial Llevant
08150 Parets del Vallès
Barcelona – Spain
consultas[zav]solerpalau[teč]com
www.solerpalau.com/en-en/home
Cabinet
The fan enclosures TH 500 to TH 800 are made of plastic, the base and canopy of steel sheet coated with black epoxy paint. The TH 1300 and TH 2000 models are made of galvanised steel sheet, the canopy of aluminium, both coated with black epoxy paint.
Running wheel
Diagonal impellers are made of plastic, with the exception of the TH 1300 and TH 2000 types, which have impellers made of sheet steel.
Motor
EC motor with thermal overload protection. Ball bearings with grease packing for life. IP44 protection, insulation class B. Operating temperature -20 °C to +60 °C.
Clamps
is mounted on the fan housing, includes a start-up capacitor.
Speed control
is performed by a potentiometer located in the terminal block or by an external REB Ecowatt control. Another option is to control using a 0-10 V control signal from a temperature, humidity or CO2 sensor.
Mounting
The TH Ecowatt roof ventilators are mounted with a mounting base on horizontal roof structures or prefabricated brick plinths. JMS
and JBS plinths can also be used.
Flow direction
The airflow can be changed by turning the fan part with motor and impeller after loosening and removing the pull-off clamps.
Instructions
The fan is universal for exhaust and supply. It is supplied as standard as a discharge, change of use is only by turning the fan unit after loosening the mounting clips and inserting (removing) the rectifier insert.
Adherence to these instructions should not pose any safety, health or environmental risks in accordance with EC directives (CE marked). The same applies to other products used in the device or during installation. Consider the following warnings:
• Observe the safety instructions to prevent damage to the device or personal injury.
• The technical information in this manual must not be changed.
• It is forbidden to interfere with the motor of the device.
• In order for the device to comply with EC directives, the device must be connected to the mains in accordance with the applicable regulations.
• The device must be installed in such a way that under normal operating conditions it cannot come into contact with any moving part and / or live part.
• The device complies with the applicable regulations for the operation of electrical equipment.
• Always disconnect the device from the power supply before carrying out any work on it.
• Appropriate tools must be used when handling or maintaining the device.
• The device must only be used for the purposes for which it is intended.
• This appliance is not intended for use by children under 8 years of age and persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a responsible person. The user must ensure that children do not play with the device. Cleaning and maintenance of the appliance must not be carried out by children without supervision.
