Share on Facebook
Tweet
Send emailCabinet
It is made of galvanized steel sheet, painted in RAL 9010 or natural zinc. The fan intake is fitted with a cover grille. There is a louvre with manually adjustable aluminium slats on the discharge.
Fan
is maintenance-free, high performance, statically and dynamically balanced with built-in thermocontact against overheating. Fan voltage 230 V or 400 V. The fans are equipped with a diffuser to reduce noise.
Heater
Powerful 2-, 3-, and 4-row Cu/Al exchangers for max. 90°/1.6 MPa. Slat spacing allows for trouble-free cleaning. Electronically controlled exchangers with heating elements with built-in overheat protection, including emergency electronics with the possibility of connecting a room or exhaust thermostat.
Regulation
Units with el. The heater is always supplied with a DR-CP4 controller. Heaters cannot be chained. Units with a water heater and 230V fan are controlled with the SR-CP-230V controller. Units can be chained. Units with water heater and 400 V fan are controlled by the SR-CP-400V controller. Units can be daisy chained. The size of the controller is sized according to the current load of the connected units.
Square box
Units with el. heater have a connection terminal block inside. The cables are routed through grommets on the side of the cabinet. Units with a water heater have the fan power connected directly to the fan terminal block.
Noise
The sound pressure levels shown in the table are for a distance of 5 m from the unit in an area of average reflectivity.
Mounting
On the wall using the universal positionable hanger. Units with water heater can also be installed under the ceiling.
Information
Circulation unit designed for hot air room heating.
Adherence to these instructions should not pose any safety, health or environmental risks in accordance with EC directives (CE marked). The same applies to other products used in the device or during installation. Consider the following warnings:
• Observe the safety instructions to prevent damage to the device or personal injury.
• The technical information in this manual must not be changed.
• It is forbidden to interfere with the motor of the device.
• In order for the device to comply with EC directives, the device must be connected to the mains in accordance with the applicable regulations.
• The device must be installed in such a way that under normal operating conditions it cannot come into contact with any moving part and / or live part.
• The device complies with the applicable regulations for the operation of electrical equipment.
• Always disconnect the device from the power supply before carrying out any work on it.
• Appropriate tools must be used when handling or maintaining the device.
• The device must only be used for the purposes for which it is intended.
• This appliance is not intended for use by children under 8 years of age and persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a responsible person. The user must ensure that children do not play with the device. Cleaning and maintenance of the appliance must not be carried out by children without supervision.
