SILENT ECO U 60/GL/F90 Z IPX5 small centrifugal fan

Cabinet

It is made of ABS, colour white RAL 9016. ECO-A has a rearward discharge, the diameter of the outlet is 78 mm. ECO-U has a rearward (Z) or upward (H) discharge, for pipes with a diameter of 75-80 mm. There is a check valve on the discharge. Mounting is on the wall, concealed or in the ceiling. The front grille includes a filter and silencer.

Running wheel

is radial with forward curved blades, press-fitted to the outer rotor.

Motor

is asynchronous with external rotor, high efficiency and low power consumption. The motor has grease-filled ball bearings for life. It is equipped with thermal overload protection, max. ambient temperature is 40˚C. IPX5 protection.

Square box

is accessible by removing the front grille.

Speed control

is carried out by electronic controllers. Two-speed ECO-U GL, ECO-A GL fans are also available.

Mounting

The ECO-U is installed flush or in the ceiling, in both horizontal and vertical positions. The fan is not supplied assembled, the cabinet is covered with a temporary anti-fouling lid and is replaced with a loose-fitting faceplate after installation. The enclosure, fan motor and faceplate can be supplied separately on special order. The inaccuracy of the brickwork can be compensated by rotating the faceplate by up to approx. 10˚. ECO-A is mounted on the wall or on the ceiling.

Options

SILENT ECO-U 60/100/F90 flush-mounted versions are available:
- H flush-mounted version with top outlet
- Z flush-mounted version with rear outlet
- GL H flush-mounted version with top outlet, two-turn
- GL Z flush-mounted version with rear outlet, two-turn

SILENT ECO-A 60/100/F90 for plaster (rear outlet only) available in the following versions:
- Standard version with rear outlet
- GL version for plaster, two-turn

Instructions

The fans are suitable for very demanding interiors, architectural solutions and for the extraction of odours directly from sanitary ware.