Share on Facebook
Tweet
Send email
S&P SISTEMAS DE VENTILACIÓN, S.L.U.
Llevant, 4
Polígono Industrial Llevant
08150 Parets del Vallès
Barcelona – Spain
consultas[zav]solerpalau[teč]com
www.solerpalau.com/en-en/home
Cabinet
The cabinet is made of impact-resistant plastic, the colour is white or silver (see variants). The cabinet is designed for wall mounting. The fans include a patented check damper.
Running wheel
The impeller is axial, made of high quality impact resistant plastic.
Motor
The motor is asynchronous. The motor is equipped with overload protection. The maximum operating ambient temperature is 40 ˚C. The motor has grease-filled ball bearings for life. Protection class IP45, insulation class II.
Square box
The terminal box is accessible by removing the front fan grille. Connection is via a concealed cable.
Speed control
Speed control is performed by regulators by changing the voltage.
Noise
The noise emitted by the fan is measured at a distance of 3 m in the free acoustic field.
Variants
C - version with return damper
Z - ball bearings
R - adjustable time 1 to 30 minutes
H - hygrostat, adjustable time 1-30 minutes
SILVER - version in silver
PLUS - more powerful version
Mounting
Mounting without limitation horizontally and vertically. Fixing with four screws under the fan grille. Screws and dowels included.
Instructions
The fans are suitable for short ducts with low pressure drop or for direct through-wall ventilation. The R variant can be actuated by a push button.
By following the instructions in the manual, no risk should arise regarding safety, health and the environment in accordance with the EC Directives (with CE marking). The same applies to other products used in the equipment or during installation. The following general information is important:
- observe the safety instructions to avoid damage to the equipment or personal injury
- the technical information given in these instructions must not be altered
- it is forbidden to interfere with the equipment's motor
- in order to comply with the EC directives, the equipment must be connected to the mains in accordance with the applicable regulations
- the equipment must be installed in such a way that, the equipment must comply with the applicable regulations for the operation of electrical equipment
- it must always be disconnected from the power supply before any tampering with the equipment
- appropriate tools must be used when handling or maintaining the equipment
- the equipment must be used only for the following purposes, for which it is intended
- this appliance must not be used by children under the age of 8 years and by persons with reduced physical, sensory or mental abilities, or persons with a lack of experience and knowledge, unless they are supervised by a responsible person or have been adequately instructed in the safe use of the appliance and can understand the risks involved
- the user must ensure that children do not play with the appliance
- cleaning and maintenance of the appliance must not be carried out by unsupervised children
