SC+60 160 fire damper

Fire protection disc valve designed for use as a fire stop in ventilation systems.
Read more
B2B clients will see their prices after logging in
1 535,00 CZK excl. VAT
1 857,35 CZK incl. VAT
Availability: on request [24.7.2025, 16:10] Update

Product code: RT101200030
Product description
Description

The body of the fire damper is made of painted steel sheet. The actual closing part consists of a double leaf flap and a fusible lock. If the ambient temperature of the fuse exceeds 72 °C, the damper closes.

Use

The flap is intended for use as a fire stop in ventilation systems. The resistance of the device has been tested according to EN 13501 and EN 1366-2. The fire resistance classification of the shutter installed in a masonry wall construction is EI120S. Classifications for other constructions can be found in the table or in the Declaration of Performance document. The SC+ damper can be used for both inlet and outlet pipes (except SC0).

Variants

- stand-alone fire damper (type SC+)
- fire damper classified according to EN 13 501 for integrity (E) only. The type designation is SC0. This variant is designed for exhaust.
The FT SC fire damper is replaceable and can be ordered as an accessory. The FCU SC position limit switch can also be supplied as an accessory.

Mounting

- the damper is designed for both extract and supply air, type SC0 only for extract air
- it can be installed in any position of the valve axis
- the product must be installed in accordance with the certified project documentation in terms of its classification - see Declaration of Performance
- the damper must be further installed according to the enclosed installation instructions
- we recommend that it is installed in such a way that maintenance and regular serviceability checks are possible

Accessories

- RDK pipe inspection element

Caution

Fire dampers are fire safety devices, therefore it is essential to follow the rules prescribed by the standard (training of installers, carrying out regular operational checks, etc.) Please ask for information.

Full description
Bezpečnostní pokyny

By following the instructions in the manual, no risk should arise regarding safety, health and the environment in accordance with the EC Directives (with CE marking). The same applies to other products used in the equipment or during installation. Please consider the following general information important:

- observe the safety instructions to avoid damage to the equipment or personal injury
- the technical information given in these instructions must not be altered
- it is forbidden to interfere with the equipment's motor
- in order to comply with the EC directives, the equipment must be connected to the mains in accordance with the applicable regulations
- the equipment must be installed in such a way that, the equipment must comply with the applicable regulations for the operation of electrical equipment
- it must always be disconnected from the power supply before any tampering with the equipment
- appropriate tools must be used when handling or maintaining the equipment
- the equipment must be used only for the following purposes, for which it is intended
- this appliance must not be used by children under the age of 8 years and by persons with reduced physical, sensory or mental abilities, or persons with a lack of experience and knowledge, unless they are supervised by a responsible person or have been adequately instructed in the safe use of the appliance and can understand the risks involved
- the user must ensure that children do not play with the appliance
- cleaning and maintenance of the appliance must not be carried out by unsupervised children

Downloads
Technical sheets, manuals and declarations
Catalogue sheet .pdf (127.80 kB)
Instructions .pdf (3.03 MB)
Contact Us