Share on Facebook
Tweet
Send emailFeatures
- constant pressure control
- constant flow control
- setpoint adjustment via rotary element
- 0-10 V analogue output control signal
- remote control via 0-10 analogue input V
- self-calibration option
- uncalibrated Wilson grids or measuring screens can be used as sensors
- in conjunction with the Digireg® controller can be used to control as a percentage of the total controller range
The regulator is equipped with a differential pressure sensor that either senses the actual pressure or is used to measure the flow in the duct. The controller then regulates the fan output to maintain the desired pressure or flow set by the rotary element.
Accessories
- IRIS adjustable control and measuring orifice that can be used as a pressure sensor for REET6 regulators
- MR fixed measuring grid that can be used as a pressure sensor for REET6 regulators
Adherence to these instructions should not pose any safety, health or environmental risks in accordance with EC directives (CE marked). The same applies to other products used in the device or during installation. Consider the following warnings:
• Observe the safety instructions to prevent damage to the device or personal injury.
• The technical information in this manual must not be changed.
• It is forbidden to interfere with the motor of the device.
• In order for the device to comply with EC directives, the device must be connected to the mains in accordance with the applicable regulations.
• The device must be installed in such a way that under normal operating conditions it cannot come into contact with any moving part and / or live part.
• The device complies with the applicable regulations for the operation of electrical equipment.
• Always disconnect the device from the power supply before carrying out any work on it.
• Appropriate tools must be used when handling or maintaining the device.
• The device must only be used for the purposes for which it is intended.
• This appliance is not intended for use by children under 8 years of age and persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a responsible person. The user must ensure that children do not play with the device. Cleaning and maintenance of the appliance must not be carried out by children without supervision.
