Share on Facebook
Tweet
Send email
S&P SISTEMAS DE VENTILACIÓN, S.L.U.
Llevant, 4
Polígono Industrial Llevant
08150 Parets del Vallès
Barcelona – Spain
consultas[zav]solerpalau[teč]com
www.solerpalau.com/en-en/home
Cabinet
It is made of steel sheet, coated with black polyester lacquer, the screws are electroplated. The cabinet is equipped with a surge suction nozzle and protective grille according to EN 60335-1 and EN 60335-2-80 and is mounted on a stand made of steel tubes. The cabinet can be rotated according to the air flow direction after loosening the nuts.
Running wheel
is made of glass fibre reinforced thermoplastic. The impeller is statically and dynamically balanced according to ISO 1940. The rotation of the blades is set by the manufacturer.
Motor
asynchronous with resistive armature, stator with cooling fins, black epoxy lacquer finish. The motors are equipped with thermal fuse as standard, the windings are tropical finish with class F insulation and working temperature - 40 to +70 ˚C. Grease-filled ball bearings for life. IP65 protection.
Speed control
is carried out by electronic or transformer regulators by changing the voltage. Size 630 cannot be regulated.
Rotation direction
cannot be changed. Air flow from impeller to motor.
Clamps
is standard black plastic, is located on the housing and includes a fan switch. On single phase designs it also contains a start-up capacitor. It is IP65 rated.
Mounting
The fan can be erected on the workplace on any solid base.
Instructions
Fans are suitable for ventilation of production halls, foundries, forges, drying rooms, machine rooms, construction sites, greenhouses and kennels.
Adherence to these instructions should not pose any safety, health or environmental risks in accordance with EC directives (CE marked). The same applies to other products used in the device or during installation. Consider the following warnings:
• Observe the safety instructions to prevent damage to the device or personal injury.
• The technical information in this manual must not be changed.
• It is forbidden to interfere with the motor of the device.
• In order for the device to comply with EC directives, the device must be connected to the mains in accordance with the applicable regulations.
• The device must be installed in such a way that under normal operating conditions it cannot come into contact with any moving part and / or live part.
• The device complies with the applicable regulations for the operation of electrical equipment.
• Always disconnect the device from the power supply before carrying out any work on it.
• Appropriate tools must be used when handling or maintaining the device.
• The device must only be used for the purposes for which it is intended.
• This appliance is not intended for use by children under 8 years of age and persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a responsible person. The user must ensure that children do not play with the device. Cleaning and maintenance of the appliance must not be carried out by children without supervision.
