Share on Facebook
Tweet
Send email
S&P SISTEMAS DE VENTILACIÓN, S.L.U.
Llevant, 4
Polígono Industrial Llevant
08150 Parets del Vallès
Barcelona – Spain
consultas[zav]solerpalau[teč]com
www.solerpalau.com/en-en/home
Cabinet
The cabinet is made of white plastic with green base and necks. The cabinet has 6 inlet throats Ø 80 mm, 1 inlet throat Ø 125 mm and one discharge throat Ø 125 mm. 4 inlet throats are fitted with plugs as standard. The throats can be rotated by 90°. The motor base can be easily removed for cleaning and inspection purposes.
Running wheel
The impeller is radial, with backward curved blades. The impeller is statically and dynamically balanced.
Motor
OZEO-H ST 2 has an asynchronous motor with external rotor and ball bearings. The OZEO-H Ecowatt 2 has a DC motor with high efficiency and low power consumption. The operating ambient temperature is from -20 ˚C to +45 ˚C. Class I insulation, IPX2 protection.
El. connection
A 5-core cable exits the enclosure through a grommet, terminal block not included. Supply voltage 230 V, 50 Hz.
Speed control
The unit regulates itself as required. The unit is designed for continuous operation.
Mounting
Mounting is done on the wall, ceiling or by hanging from the ceiling. Unused intake throats must be fitted with plugs, which are included in the delivery. A minimum pipe length of 0.9 m must be connected to the suction and discharge outlets.
Instructions
The ventilators are intended as central ventilation for family houses, sanitary facilities, offices and smaller premises. Preferably, when installed in the soffit, flexo headers and plate valves can be used. The fans can be used in conjunction with a HIG 2 hygrostat or a hygrostat combined with a thermostat for ventilation of wet areas.
Adherence to these instructions should not pose any safety, health or environmental risks in accordance with EC directives (CE marked). The same applies to other products used in the device or during installation. Consider the following warnings:
• Observe the safety instructions to prevent damage to the device or personal injury.
• The technical information in this manual must not be changed.
• It is forbidden to interfere with the motor of the device.
• In order for the device to comply with EC directives, the device must be connected to the mains in accordance with the applicable regulations.
• The device must be installed in such a way that under normal operating conditions it cannot come into contact with any moving part and / or live part.
• The device complies with the applicable regulations for the operation of electrical equipment.
• Always disconnect the device from the power supply before carrying out any work on it.
• Appropriate tools must be used when handling or maintaining the device.
• The device must only be used for the purposes for which it is intended.
• This appliance is not intended for use by children under 8 years of age and persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a responsible person. The user must ensure that children do not play with the device. Cleaning and maintenance of the appliance must not be carried out by children without supervision.
