Single suction radial fan with belt motor. Made of steel sheet protected with cataphoretic primer and polyurethane varnish. Designed for continuous operation, air temperature from -20 °C to +60 °C.
Mounting Assemblies
- OPTION 1: Free shaft, for pulley or belt drive.
- PROVISION 9: Includes motor, pulleys, belts and protective cover. Motor located on the side of the mounting bracket.
- OPTION 12: Includes motor, pulleys, belts and protective cover. Motor mounted on mounting bracket.
Motors
2, 4 or 6 pole, IE 3 high efficiency (from 0,75 kW can be IE 2 motor and controlled by frequency converter), three phase 230/400 V, 50 Hz up to motor size 132. For motor sizes above 132 400/690 V, 50 Hz. Protection IP55, insulation class F.
On request
- stainless steel and other materials
- two-speed motors
- 60 Hz version
- painted in various RAL colours
- high temperature version (up to 250 °C, version B with cooling disc)
- inspection door, condensate drain, shaft seal
- welded spiral shaft
- thermally insulated spiral housing
ATEX design
Optionally available in explosion-proof design according to ATEX directive for three-phase motors and for ambient atmospheric conditions as defined by EN 14986. Temperature range -20 °C to +60 °C, absolute pressure 0.8 to 1.1 bar.
- Gas:
Ex 2G IIB T2-T3, motor Exd IIB or ExeII
Ex 2G IIB+H2 T2-T3, motor ExdIIC
Ex 3G IIB T2-T3, motor ExnA (only for zone 3G)
Ex 3G IIB+H2 T2-T3, motor ExnA (only for zone 3G)
- Non-conductive dust:
Ex 2D IIIB T195°C-T295°C
Ex 3D IIIB T195°C-T295°C
- Conductive dust (IP65 motor required):
Ex 2D IIIC T195°C-T295°C
Ex 3D IIIC T195°C-T295°C
Share on Facebook
Tweet
Send email
