In the cart you have for 0,00 CZK
In the cart you have for 0,00 CZK
Search by text
Search by parameters
 
Enter any pipe size at the inlet or discharge.

EDF-SUM 0-10 V summator

Summator designed to combine the outputs of up to 8 Airsens sensors.
Read more
B2B clients will see their prices after logging in
815,00 CZK excl. VAT
986,15 CZK incl. VAT
Availability: on request [3.8.2025, 16:10] Update

Add to project
Share

Add to project
Share
Product code: PX102100180
EAN: PX102100180
Product description

The adder is designed to combine the outputs of up to 8 Airsens sensors. The voltage value of the most excited sensor will always be at the output of the adder.

- 8 inputs of 0-10 VDC standard
- low output bias
- easy connection
- easy wall mounting

Description

EDF-SUM simplifies air quality monitoring or ventilation control when using multiple sensors. Up to 8 sensors can then be connected to the inputs of the EDF-SUM, whose output will always be the highest output of the connected sensors.

Disassembly

First, the lid of the box must be unscrewed from the bottom of the electronics section. Once connected to the terminal block, reassemble by reinstalling the cap and screwing it back on. The cables must be routed through the cable gland.

Method of use

The product is intended for indoor use.

Full description
Safety regulations

Adherence to these instructions should not pose any safety, health or environmental risks in accordance with EC directives (CE marked). The same applies to other products used in the device or during installation. Consider the following warnings:

• Observe the safety instructions to prevent damage to the device or personal injury.
• The technical information in this manual must not be changed.
• It is forbidden to interfere with the motor of the device.
• In order for the device to comply with EC directives, the device must be connected to the mains in accordance with the applicable regulations.
• The device must be installed in such a way that under normal operating conditions it cannot come into contact with any moving part and / or live part.
• The device complies with the applicable regulations for the operation of electrical equipment.
• Always disconnect the device from the power supply before carrying out any work on it.
• Appropriate tools must be used when handling or maintaining the device.
• The device must only be used for the purposes for which it is intended.
• This appliance is not intended for use by children under 8 years of age and persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a responsible person. The user must ensure that children do not play with the device. Cleaning and maintenance of the appliance must not be carried out by children without supervision.

Downloads
Technical sheets, manuals and declarations
Datasheet .pdf (89.92 kB)
Operating Instructions .pdf (87.09 kB)
Contact Us