Share on Facebook
Tweet
Send email
S&P SISTEMAS DE VENTILACIÓN, S.L.U.
Llevant, 4
Polígono Industrial Llevant
08150 Parets del Vallès
Barcelona – Spain
consultas[zav]solerpalau[teč]com
www.solerpalau.com/en-en/home
Product description
Cabinet
The cabinet is made of impact-resistant plastic, the colour is white. The cabinet is designed for wall mounting. There is a return flap in the fan discharge.
Running wheel
The impeller is radial, plastic with forward curved blades. The impeller is statically and dynamically balanced.
Motor
The motor is asynchronous with shorted armature and shielded pole. The motor is equipped with overheating protection. The maximum operating ambient temperature is 40 ˚C. The motor has plain bearings. IPX2 protection.
Square box
The terminal block is accessible by removing the front grille and terminal cover, connecting flush or cable on plaster. The terminal block includes a relief clip to prevent the cable from being pulled out.
Speed control
Speed regulation is carried out by electronic speed control by changing the voltage.
Noise
The noise emitted by the fan is measured at a distance of 1.5 m in the fan axis at free discharge.
Variants
- EB 100 N S standard version
- EB 100 N T run time 5-25 min.
Mounting
Mount without restriction horizontally or vertically using the paper mounting template supplied. Dowels and screws are also included.
Instructions
Vents are suitable for relatively long ducts with greater pressure drop or for venting directly through a wall. The fans can be used for ventilation in residential construction, in conjunction with a HIG 2 hygrostat or a hygrostat combined with a thermostat for ventilation of wet areas.
Parameters
| Základní údaje | |
|---|---|
| Fan type | radial |
| Mounting | wall and ceiling mounted |
| Weight | 1,10 kg |
| Max. air temperature | 40 °C |
| Připojení | |
| Connection pipe diameter | 100 mm |
| Elektrické parametry | |
| Power supply | 230 V |
| Ingress Protection | IPX2 |
| Engine type | AC |
| Maximum power | 28 W |
| Vybavení | |
| Check valve | Yes |
| Delayed run-down | No |
| Adjustable coasting | No |
| Hygrostat | No |
| Motion sensor | No |
| Adjustability | Yes |
| Particle filter | No |
| More intake ports | No |
| Sound insulation | No |
| Ball bearings | No |
| Další | |
| Maximum speed | 2 000 min⁻¹ |
Adherence to these instructions should not pose any safety, health or environmental risks in accordance with EC directives (CE marked). The same applies to other products used in the device or during installation. Consider the following warnings:
• Observe the safety instructions to prevent damage to the device or personal injury.
• The technical information in this manual must not be changed.
• It is forbidden to interfere with the motor of the device.
• In order for the device to comply with EC directives, the device must be connected to the mains in accordance with the applicable regulations.
• The device must be installed in such a way that under normal operating conditions it cannot come into contact with any moving part and / or live part.
• The device complies with the applicable regulations for the operation of electrical equipment.
• Always disconnect the device from the power supply before carrying out any work on it.
• Appropriate tools must be used when handling or maintaining the device.
• The device must only be used for the purposes for which it is intended.
• This appliance is not intended for use by children under 8 years of age and persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a responsible person. The user must ensure that children do not play with the device. Cleaning and maintenance of the appliance must not be carried out by children without supervision.
