Share on Facebook
Tweet
Send email
S&P SISTEMAS DE VENTILACIÓN, S.L.U.
Llevant, 4
Polígono Industrial Llevant
08150 Parets del Vallès
Barcelona – Spain
consultas[zav]solerpalau[teč]com
www.solerpalau.com/en-en/home
Cabinet
is made of galvanized steel sheet. The cabinet is internally coated with a 7 mm layer of soundproofing material. The fan is mounted in the enclosure on sprung profiles to reduce vibration transmission. Circular sockets are screwed onto the housing for connecting flexible hoses or circular pipework. The cabinet is under vacuum when the fan is in operation.
Fan
is radial with forward curved blades, double-sided suction.
Motor
is asynchronous with short armature, mounted in the air stream. CVB fan motors are 1-phase for 230 V, CVT are 3-phase for 230/400 V. The motor has grease-filled ball bearings for life and a built-in thermal overheat protector. Class F insulation, IP44 protection. Operating temperature -20 °C to +40 °C.
Square box
It is made of black plastic as standard, is loosely connected to the supply cable from the motor and can be screwed to an easily accessible location on the enclosure with self-tapping screws. Cable length approx. 0.5 m, IP55 protection.
Noise
emitted by the fan is listed in the tables.
Mounting
indoor and outdoor using CSC canopy, preferably with the motor axis horizontal due to bearing life. Clearance must be left around the fan for removal of side panels and inspection work. The casing must not transmit mechanical stresses from the pipework. A flexible connection to the ductwork must be used.
Instructions
Fans are suitable for air handling applications where low fan noise is advantageous. The fans are particularly suitable for ventilation of restaurants, sports halls, hospitals and warehouses.
Adherence to these instructions should not pose any safety, health or environmental risks in accordance with EC directives (CE marked). The same applies to other products used in the device or during installation. Consider the following warnings:
• Observe the safety instructions to prevent damage to the device or personal injury.
• The technical information in this manual must not be changed.
• It is forbidden to interfere with the motor of the device.
• In order for the device to comply with EC directives, the device must be connected to the mains in accordance with the applicable regulations.
• The device must be installed in such a way that under normal operating conditions it cannot come into contact with any moving part and / or live part.
• The device complies with the applicable regulations for the operation of electrical equipment.
• Always disconnect the device from the power supply before carrying out any work on it.
• Appropriate tools must be used when handling or maintaining the device.
• The device must only be used for the purposes for which it is intended.
• This appliance is not intended for use by children under 8 years of age and persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a responsible person. The user must ensure that children do not play with the device. Cleaning and maintenance of the appliance must not be carried out by children without supervision.
