CTVT/6-560 PTC IP55 roof mounted fan

Cabinet

It is designed for horizontal air exhaust for CTHT type, for vertical air exhaust for CTVT type. The base of the fan is made of galvanized steel sheet, the brackets, grille and screws are also electroplated. The fan shroud and casing are made of Al sheet metal. The fan motor is mounted outside the air flow. The motor ventilation circuit is separate, using its own radial impeller. There is a ventilation joint around the perimeter of the canopy on the CTHT fan, on the CTVT type the motor ventilation is led out of the side of the casing.

Impeller

The fan is radial with backward curved blades. It is made of galvanized steel sheet and is statically and dynamically balanced.

Motor

is asynchronous with shorted resistance armature, stator with cooling fins, black epoxy lacquer finish. Motors are 3-phase for 230/400 V. PTC thermistors on request. The windings are tropicalised with class F insulation and a permanent operating temperature of -40 to +120 °C. Grease-filled ball bearings for life. Protection rating IP55.

Square box

Accessible by removing the fan canopy. The protection is IP55.

Speed control

is performed by frequency converters.

Rotation direction

is only possible in one direction, as indicated by the arrow on the fan housing. The opposite direction of rotation can cause motor overload, and the fan will also experience increased noise.

Mounting

The fan is mounted horizontally using the accessories (with the motor axis vertical).

Noise

Emitted by the fan is measured in the free acoustic field at a distance of 3 m at 2/3 of the maximum air power.

Instructions

The fans are suitable for general air handling applications.