COR-12-1500 N air curtain

Cabinet

The cabinet is made of steel sheet powder-coated in white (RAL 9003), the connecting elements are additionally electroplated.

Fans

Special quiet tangential fans are used in the door screens.

Motor

The motor is asynchronous with short armature.

Heater

The heater is electric.

Electric connection

The electrical connection is made to the internal terminal block in the door screen housing. Models with an electric heater are equipped with thermal protection as standard.

Regulation

Regulation of screens with el. The speed can be switched in three stages and the heater power in two stages (full power and ½ power, for COR-3,5 only full power for COR-3,5). The shutters also allow connection of an external thermostat (not supplied) for automatic operation. When multiple orifices are arranged side by side, up to 5 identical orifices can be connected to one controller.

Noise

All models feature low noise levels due to the balanced impeller.

Variants

- COR-F-1000 N - without heater
- COR-F-1500 N - without heater
- COR-F-2000 N - without heater
- COR-3,5-1000 N - with el. 3,5 kW heater
- COR-6-1000 N - with el. 6 kW heater
- COR-9-1000 N - with el. 9 kW heater
- COR-9-1500 N - with el. 9 kW heater
- COR-12-1500 N - with el. 12 kW heater
- COR-18-2000 N - with el. 18 kW
- COR-1000 NW 9 - with water heater 9 kW
- COR-1500 NW 15 - with water heater 15 kW
- COR-2000 NW 24 - with water heater 24 kW

Mounting

Clones can be mounted directly on the wall or suspended from the ceiling with M8 threaded rods. The minimum height should be 1.8 m and the maximum 3 m above the floor. The minimum distance from the ceiling or walls must be 100 mm.

Information

An air door screen in a compact design with easy installation suitable for small commercial premises. Multiple screens can be arranged side by side if required.