CADS Flexeo 210 static ventilation unit with heat recovery

Cabinet

is black in colour and made of high quality EPP plastic. The necks are white and are rotatable by 90º. The inside of the unit is easily accessible thanks to special tension locks located on the cabinet. A condensate drain is led out from the bottom of the cabinet. The unit is equipped with an exchanger bypass in the BP version.

Fans

The unit is static - no fans.

Recuperation

The counterflow plate heat exchanger is plastic and has an efficiency of up to 94%. It is easily accessible from the top of the unit by undoing the tension locks. For summer operation, the BP version of the unit is equipped with an exchanger bypass.

Filter

The unit is equipped with 2 plate filters for exhaust air intake and fresh air intake, G4 (ISO coarse 65%) and M5 (ISO ePM10 50%). The filters are easily accessible from the top of the unit, no tools are required to remove them.

Outdoor filters

- AFR-FLEXEO Kit set of replacement filters G4 (ISO coarse 65%) and M5 (ISO ePM10 50%)

Regulation

Optionally, a remote control is available to enable BOOST mode (using additional components), control exchanger bypass and disable filter clogging messages.

Options

- CADS Flexeo standard version
- CADS Flexeo BP version with exchanger bypass

Mounting

The unit is designed for horizontal and vertical indoor installation. Its low height makes it ideal for installation in ceilings. Installation is carried out using clamps that attach directly to the unit. The unit must be mounted in such a way as to provide space for opening the unit lid, changing filters and connecting the condensate drain to the waste with a siphon cap.

Accessories

- ED Flex System® circular air ducts
- ED Plano System® square air ducts
- MBE-AFP 125/0.4 electric air preheater

Instructions

Due to the high efficiency of the heat exchanger, no preheating is usually necessary. In areas where temperatures are often below -5 °C, it is recommended to install a hot-water heat exchanger or an electric air preheater of adequate capacity (e.g. MBE-AFP 125/0.4) for fresh air intake. It is recommended to change filters at least once a year.

Information

Static ventilation unit with heat recovery (without fans). The unit is suitable in conjunction with external fans for apartment buildings or smaller commercial buildings. The unit is designed for permanent operation. Maximum flow rate 210 m³/h.