Share on Facebook
Tweet
Send email
S&P SISTEMAS DE VENTILACIÓN, S.L.U.
Llevant, 4
Polígono Industrial Llevant
08150 Parets del Vallès
Barcelona – Spain
consultas[zav]solerpalau[teč]com
www.solerpalau.com/en-en/home
Product description
Cabinet
is made of durable hardened white plastic. The heat exchanger part of the unit allows for installation in a wall with a thickness of 250-490 mm (a 700 mm extension can be supplied as an option). The internal part of the unit is equipped with a design front cover containing a digital display for unit management.
Fan
The unit is fitted with a reversible axial fan with DC motor. The fan is designed for continuous operation.
Motor
Commutatorless motor with electronic control and low power consumption.
Regeneration
The unit is equipped with a regeneration heat exchanger made of ceramic material. It achieves a ZZT efficiency of up to 94%. For easy maintenance and servicing, the heat exchanger is accessible by removing the unit's inner cover.
Filters
A G4 class filter (ISO coarse 60%) is located on both sides of the heat exchanger.
Mounting
The unit is designed for internal wall mounting. The unit can only be installed in the horizontal axis of the heat exchanger body with a minimum inclination of 1% to the outside edge of the wall. The telescopic tube containing the heat exchanger, fan and filters can be adapted to the wall thickness in the range of 250-490 mm (length 700 mm when using the alternative extension as an optional accessory). An internal design cover with digital display and an external facade grille are also included.
Electrical connection
A three-core 230 V / 50 Hz power cable is routed from the unit.
Regulation
The unit has a fully automatic mode, which, based on the integrated humidity sensor, ensures smooth speed regulation without the need for any further intervention in the unit control. It is also possible to control the unit manually. The design remote control allows the setting of ventilation intensity in 4 stages, supply only mode, night silent mode and by-pass mode. In the standard supply and extract mode, the flow change interval is set to 60 s. Without any additional accessories, up to 4 units can be synchronised wirelessly at the same time. In addition, the unit can be controlled with AIRSENS RF wireless air quality sensors or a wireless BOOST RF button can be added to the unit.
Noise
The tables show the sound power level measured at flow rates of 45 and 60 m3/h.
Accessories
- PULSE 160 T700 mounting tube 700 mm long
- PULSE 160-W hidden facade element for intake and exhaust
- BOOST BUTTON RF wireless power boost button
Information
Local ventilation unit designed for new construction and renovation of houses and apartment buildings. It is characterized by its easy installation with only minor structural modifications required (opening in the building envelope), which makes it an ideal solution especially for renovations.
Parametry
| Základní údaje | |
|---|---|
| Version | |
| Exchanger | |
| Připojení | |
| Diameter of the connection throats [mm] | 0 mm |
| Elektrické parametry | |
| Ingress Protection | |
| Engine type | |
| Maximum power input [W] | 0 W |
Adherence to these instructions should not pose any safety, health or environmental risks in accordance with EC directives (CE marked). The same applies to other products used in the device or during installation. Consider the following warnings:
• Observe the safety instructions to prevent damage to the device or personal injury.
• The technical information in this manual must not be changed.
• It is forbidden to interfere with the motor of the device.
• In order for the device to comply with EC directives, the device must be connected to the mains in accordance with the applicable regulations.
• The device must be installed in such a way that under normal operating conditions it cannot come into contact with any moving part and / or live part.
• The device complies with the applicable regulations for the operation of electrical equipment.
• Always disconnect the device from the power supply before carrying out any work on it.
• Appropriate tools must be used when handling or maintaining the device.
• The device must only be used for the purposes for which it is intended.
• This appliance is not intended for use by children under 8 years of age and persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a responsible person. The user must ensure that children do not play with the device. Cleaning and maintenance of the appliance must not be carried out by children without supervision.
