HTB-75 RC ceiling fan

Ceiling fans are suitable for ventilating large areas such as industrial halls, pubs, hotels, sports halls, offices, libraries, study rooms and departure halls due to their robust construction.
Read more
B2B clients will see their prices after logging in
3 142,00 CZK excl. VAT
3 801,82 CZK incl. VAT
Availability: on request [4.8.2025, 16:10] Update

Insert into the design HVAC program

Product code: SP290100310
EAN: 8413893979346
Manufacturer: S&P SISTEMAS DE VENTILACIÓN, S.L.U.   Read moreRead less

S&P SISTEMAS DE VENTILACIÓN, S.L.U.
Llevant, 4
Polígono Industrial Llevant
08150 Parets del Vallès
Barcelona – Spain
consultas[zav]solerpalau[teč]com
www.solerpalau.com/en-en/home

Product description
Running wheel

is axial, moulded from sheet steel, with three performance-optimised blades. The surface finish is grey epoxy paint RAL9002.

Motor

is asynchronous with short armature, with a large number of poles to achieve the required speed. It is designed for continuous operation. The maximum operating ambient temperature is 40 °C. The motor has sealed ball bearings with grease packing for life. The motor has overload protection built into the winding. Insulation class B. IPX0 protection.

Square box

It is accessible by removing the cable cover, which slides along the hanging bar. Connection is by cable under plaster or on plaster. The terminal block contains a relief clip to prevent the cable from being pulled out.

Speed control

Three-stage control using the controller included in the delivery. Can be changed direction of rotation using a switch on the fan motor. A wireless control is also available as an option.

Mounting

is done by hanging from the ceiling or other structure. The hanging device must be sufficiently dimensioned, both in terms of static and possible dynamic loads. The bottom edge of the fan must be positioned so high that persons in the vicinity of the rotating impeller cannot be endangered. The minimum recommended distance from the floor is 2,5 m. When installing multiple fans, the impeller blades of each fan must not be interchanged. The blades are balanced for each unit separately.

Accessories

- Speed controller included
- HTB RC KIT wireless controller with adjustable 1/3/6 hour timing
- HIG/HYG room hygrostats
- RTR 6721 room thermostat

Instructions

The fans are particularly suitable for ventilating large areas such as industrial halls, pubs, hotels, sports halls, offices, libraries, study rooms and departure halls due to their robust construction. By permanently ventilating high spaces with a significant temperature differential between floor and ceiling, spatial temperature equalization can be achieved in the winter, thereby significantly reducing energy consumption and heating costs. In these cases, differential thermostats with two sensors can be used advantageously, which switch on a fan at a set temperature difference to mix the warm and cold air zones.

Warning

The fan anchorage should be checked regularly. The inspection period must be specified in the user's operating instructions.

Full description
Safety regulations

Adherence to these instructions should not pose any safety, health or environmental risks in accordance with EC directives (CE marked). The same applies to other products used in the device or during installation. Consider the following warnings:

• Observe the safety instructions to prevent damage to the device or personal injury.
• The technical information in this manual must not be changed.
• It is forbidden to interfere with the motor of the device.
• In order for the device to comply with EC directives, the device must be connected to the mains in accordance with the applicable regulations.
• The device must be installed in such a way that under normal operating conditions it cannot come into contact with any moving part and / or live part.
• The device complies with the applicable regulations for the operation of electrical equipment.
• Always disconnect the device from the power supply before carrying out any work on it.
• Appropriate tools must be used when handling or maintaining the device.
• The device must only be used for the purposes for which it is intended.
• This appliance is not intended for use by children under 8 years of age and persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a responsible person. The user must ensure that children do not play with the device. Cleaning and maintenance of the appliance must not be carried out by children without supervision.

Downloads
Technical sheets, manuals and declarations
Datasheet .pdf (89.15 kB)
Operating Instructions .pdf (3.27 MB)
Declaration of conformity .pdf (153.43 kB)
CAD files
2D .dwg (27.09 kB)
3D .dwg (37.22 kB)
2D .dxf (36.84 kB)
3D .dxf (45.14 kB)
Contact Us