Share on Facebook
Tweet
Send email
S&P SISTEMAS DE VENTILACIÓN, S.L.U.
Llevant, 4
Polígono Industrial Llevant
08150 Parets del Vallès
Barcelona – Spain
consultas[zav]solerpalau[teč]com
www.solerpalau.com/en-en/home
Running wheel
is axial, moulded from steel sheet with epoxy lacquer finish. It has eight performance-optimised blades made of aluminium.
Motor
DC brushless motor is designed for continuous operation. The maximum operating ambient temperature is 40 °C. The motor has sealed ball bearings with grease packing for life. The motor has overload protection built into the winding. Insulation class I. IPX0 protection.
Square box
It is accessible by removing the cable cover, which slides along the hanging bar. Connection is by cable under plaster or on plaster. The terminal block contains a relief clip to prevent the cable from being pulled out.
Speed control
Six-stage control by means of the controller included in the delivery. Possibility to change the direction of rotation using the remote control.
Mounting
is done by hanging from the ceiling or other structure. The suspension device must be sufficiently dimensioned, both in terms of static and possible dynamic load. The bottom edge of the fan must be positioned so high that persons in the vicinity of the rotating impeller cannot be endangered. The minimum recommended distance from the floor is 3,5 m. When installing multiple fans, the impeller blades of each fan must not be interchanged. The blades are balanced for each unit separately.
Accessories
- HTB KIT wireless controller with adjustable 1/2/4/8 hour timer (included)
- HIG/HYG room hygrostats
- RTR 6721 room thermostat
Instructions
The fans are particularly suitable for ventilating large areas such as industrial halls, pubs, hotels, sports halls, offices, libraries, study rooms and departure halls due to their robust construction. By permanently ventilating high spaces with a significant temperature differential between floor and ceiling, spatial temperature equalization can be achieved in the winter, thereby significantly reducing energy consumption and heating costs. In these cases, differential thermostats with two sensors can be used advantageously, which switch on a fan at a set temperature difference to mix the warm and cold air zones.
Warning
The fan anchorage must be checked regularly. The inspection period must be specified in the user's operating instructions.
Adherence to these instructions should not pose any safety, health or environmental risks in accordance with EC directives (CE marked). The same applies to other products used in the device or during installation. Consider the following warnings:
• Observe the safety instructions to prevent damage to the device or personal injury.
• The technical information in this manual must not be changed.
• It is forbidden to interfere with the motor of the device.
• In order for the device to comply with EC directives, the device must be connected to the mains in accordance with the applicable regulations.
• The device must be installed in such a way that under normal operating conditions it cannot come into contact with any moving part and / or live part.
• The device complies with the applicable regulations for the operation of electrical equipment.
• Always disconnect the device from the power supply before carrying out any work on it.
• Appropriate tools must be used when handling or maintaining the device.
• The device must only be used for the purposes for which it is intended.
• This appliance is not intended for use by children under 8 years of age and persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a responsible person. The user must ensure that children do not play with the device. Cleaning and maintenance of the appliance must not be carried out by children without supervision.
