Share on Facebook
Tweet
Send email
S&P SISTEMAS DE VENTILACIÓN, S.L.U.
Llevant, 4
Polígono Industrial Llevant
08150 Parets del Vallès
Barcelona – Spain
consultas[zav]solerpalau[teč]com
www.solerpalau.com/en-en/home
Cabinet
The cabinet is made of ABS, colour white. The discharge is towards the back, the diameter of the discharge outlet is 99 mm. Mounting is on the wall or in the ceiling. The front grille of the fan contains a metal filter.
Running wheel
The impeller is radial with forward curved blades, clamped on the EC motor axis.
Motor
The motor is EC with high efficiency and low consumption. It is equipped with thermal overload protection, max. ambient temperature is 40 ˚C. IPX4 protection.
Square box
The cabinet is accessible by removing the front grille.
Constant flow control
Constant flow control is performed by toggling the DIP switches on the printed circuit board. Possible settings are 15, 22, 30, 36, 45 or 54 m3/h.
Variants
- S - continuous low flow operation, boost is done by external switch
- T - continuous low flow operation, boost is done by external switch, adjustable time 1-30 min.
- H - continuous operation with low flow, increase (boost) is done by internal humidity sensor, adjustable time 1-30 min.
- M - continuous operation with low flow, increase (boost) is done by pull switch in the fan or internal humidity sensor, adjustable time 1-30 min.
Mounting
The fan is mounted on the wall or in the ceiling.
Instructions
The fans are suitable for very demanding interiors and architectural designs.
Adherence to these instructions should not pose any safety, health or environmental risks in accordance with EC directives (CE marked). The same applies to other products used in the device or during installation. Consider the following warnings:
• Observe the safety instructions to prevent damage to the device or personal injury.
• The technical information in this manual must not be changed.
• It is forbidden to interfere with the motor of the device.
• In order for the device to comply with EC directives, the device must be connected to the mains in accordance with the applicable regulations.
• The device must be installed in such a way that under normal operating conditions it cannot come into contact with any moving part and / or live part.
• The device complies with the applicable regulations for the operation of electrical equipment.
• Always disconnect the device from the power supply before carrying out any work on it.
• Appropriate tools must be used when handling or maintaining the device.
• The device must only be used for the purposes for which it is intended.
• This appliance is not intended for use by children under 8 years of age and persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a responsible person. The user must ensure that children do not play with the device. Cleaning and maintenance of the appliance must not be carried out by children without supervision.
