Share on Facebook
Tweet
Send email
S&P SISTEMAS DE VENTILACIÓN, S.L.U.
Llevant, 4
Polígono Industrial Llevant
08150 Parets del Vallès
Barcelona – Spain
consultas[zav]solerpalau[teč]com
www.solerpalau.com/en-en/home
Product description
Cabinet
is made of galvanized steel sheet. The cabinet is internally coated with a 25 mm thick layer of soundproofing material. The enclosure has circular spigots with single-edge seals for connecting flexible hoses or circular pipes.
Running wheel
is radial with forward curved blades, single-sided suction. The impeller is directly pressed onto the outer rotor of the asynchronous motor.
Motor
is a three-turn asynchronous motor with a resistance armature and an outer rotor, mounted in an air stream. The motor insulation is class B, IP44. The motor has lifetime grease-filled ball bearings and a built-in thermal overheat protector. The operating temperature range is from -20 to 40 °C.
Screwdriver
is plastic, bolted to the fan housing, a tool must be used to open it. IP55 protection.
Speed control
is carried out by electronic or transformer regulators.
Noise
emitted by the fan is indicated in the tables and on the performance characteristics of the ducted fan.
Mounting
The fan can be installed in any position of the motor axis. Due to the design of the fan, it is important to remember to allow sufficient space for the removal of the inspection cover when mounting the fan. The housing must not transmit mechanical stresses from the pipework. A flexible connection to the pipework must be used.
Instructions
The fans are suitable for air handling applications where the low noise level of the fan is advantageous. The very low building height of the fan casing is an advantage.
Parametry
| Základní údaje | |
|---|---|
| Fan type | radial |
| Mounting | Pipeline |
| Weight [kg] | 15,90 kg |
| Připojení | |
| Diameter of inlet connection pipe [mm] | 160 mm |
| Diameter of the connection pipe at the discharge [mm] | 160 mm |
| Elektrické parametry | |
| Power supply [V] | 230 V |
| Ingress Protection | IP44 |
| Engine type | AC |
| Maximum power [W] | 97 W - 35 W |
| Maximum current [A] | 0,42 A - 0,31 A |
| Vybavení | |
| Ball bearings | Yes |
| Check valve | No |
| Delayed run-down | No |
| Adjustable coasting | No |
| Hygrostat | No |
| Motion sensor | No |
| Adjustability | Yes |
| Adjustability | No |
| Particle filter | No |
| More intake ports | No |
| Sound insulation | Yes |
| Další | |
| Max. air temperature [°C] | 40 °C |
| Maximum speed [min⁻¹] | 1 317 min⁻¹ - 714 min⁻¹ |
Adherence to these instructions should not pose any safety, health or environmental risks in accordance with EC directives (CE marked). The same applies to other products used in the device or during installation. Consider the following warnings:
• Observe the safety instructions to prevent damage to the device or personal injury.
• The technical information in this manual must not be changed.
• It is forbidden to interfere with the motor of the device.
• In order for the device to comply with EC directives, the device must be connected to the mains in accordance with the applicable regulations.
• The device must be installed in such a way that under normal operating conditions it cannot come into contact with any moving part and / or live part.
• The device complies with the applicable regulations for the operation of electrical equipment.
• Always disconnect the device from the power supply before carrying out any work on it.
• Appropriate tools must be used when handling or maintaining the device.
• The device must only be used for the purposes for which it is intended.
• This appliance is not intended for use by children under 8 years of age and persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a responsible person. The user must ensure that children do not play with the device. Cleaning and maintenance of the appliance must not be carried out by children without supervision.
