,ApplicationOfFan##OTHER##,Author##OTHER##,Description##OTHER##,Air Terminal Velocity Pressure##HVAC_PRESSURE##PASCALS,GlobalTradeItemNumber##OTHER##,GrossWeight##MASS##KILOGRAMS,ImpellerDiameter##LENGTH##MILLIMETERS,IP_Code##OTHER##,Manufacturer##OTHER##,NominalAirFlowRate##HVAC_AIR_FLOW##LITERS_PER_SECOND,NominalPowerRate##ELECTRICAL_POWER##WATTS,NominalRotationSpeed##OTHER##,NominalStaticPressure##HVAC_PRESSURE##PASCALS,NominalTotalPressure##HVAC_PRESSURE##PASCALS,PowerFactor##ELECTRICAL_DEMAND_FACTOR##PERCENTAGE,ProductURL##OTHER##,RatedCurrent##ELECTRICAL_CURRENT##AMPERES,RatedVoltage##ELECTRICAL_POTENTIAL##VOLTS,spFanSize##LENGTH##MILLIMETERS,spProductQuantity##OTHER##,spTotalProductQuantity##OTHER##,spMotorClass##OTHER##,spProductCode##OTHER##,spEasyVentProductCode##OTHER##,spGenericalProductConfiguration##OTHER##,spProductDescription##OTHER##,spEasyVentProductDescription##OTHER##,spSoundDistance##OTHER##,spIdProject##OTHER##,spMaxAbsorbedCurrent##ELECTRICAL_CURRENT##AMPERES,spProjectLineURL##OTHER##,Model##OTHER##,spProjectName##OTHER##,spPosition##OTHER##,spElectricalPower_Solution##ELECTRICAL_POWER##WATTS,spSpecificPower_Solution##OTHER##,spInletSoundPower##OTHER##,spOutletSoundPower##OTHER##,spBreakOutSoundPower##OTHER##,spShaftPower_Solution##ELECTRICAL_POWER##WATTS,spInletSoundPressure##OTHER##,spOutletSoundPressure##OTHER##,spBreakOutSoundPressure##OTHER##,spReference##OTHER##,spRevision##OTHER##,MasterformatCode##OTHER##,MasterformatTitle##OTHER##,Uniclass2.0Code##OTHER##,Uniclass2.0Title##OTHER##,UNSPSCCode##OTHER##,UNSPSCTitle##OTHER##,OmniclassCode##OTHER##,OmniclassTitle##OTHER##,PAH##LENGTH##MILLIMETERS,PBH##LENGTH##MILLIMETERS,PC##LENGTH##MILLIMETERS,PD##LENGTH##MILLIMETERS,PE##LENGTH##MILLIMETERS,PF##LENGTH##MILLIMETERS,PG##LENGTH##MILLIMETERS "CTHT/4/8-400 N (380-415V50HZ) N8",,,"
Range of centrifugal roof mounted fans in horizontal discharge format, designed for smoke extraction in fire conditions and certified F400-120 (1). Suitable for air stream temperature up to 120ºC.
- Base manufactured from galvanised sheet steel.
- High efficiency centrifugal backward curved impeller manufactured from galvanized sheet steel.
- Cowl manufactured from spun aluminium.
- All models incorporate bird-proof guard
- Available, depending on the model, in 4, 6 or 4/8 poles.
(1) Except 180 and 200 models
Motors
Models from 180N to 400N
- Single-phase, single-speed motor 220- 240V50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by voltage**.
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by frequency inverter and by voltage**.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles, IP55, class F, with safety thermal overload protection*.
Models from 450N to 630N
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles (only 450N), IP55, class F.
Model 630H, 710N and 710H
- Three-phase single-speed motor 400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
* When thermal protection are connected, the electrical installation must be equipped with a security system that, in case of fire, allows the maximum speed of the fans whatever the current state of the thermal protection.
** When using a speed controller, the electrical installation must be equipped with a security system that allows, in case of fire, the maximum speed of the fans.
Additional information
180N, 200N and 225N models are specially designed for extracting smokes from fireplaces.
Three-phase 2-speed motor 380-450V 50Hz, 6/12 poles (from 450N to 710H) on demand.
Range of centrifugal roof mounted fans in horizontal discharge format, designed for smoke extraction in fire conditions and certified F400-120 (1). Suitable for air stream temperature up to 120ºC.
- Base manufactured from galvanised sheet steel.
- High efficiency centrifugal backward curved impeller manufactured from galvanized sheet steel.
- Cowl manufactured from spun aluminium.
- All models incorporate bird-proof guard
- Available, depending on the model, in 4, 6 or 4/8 poles.
(1) Except 180 and 200 models
Motors
Models from 180N to 400N
- Single-phase, single-speed motor 220- 240V50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by voltage**.
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by frequency inverter and by voltage**.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles, IP55, class F, with safety thermal overload protection*.
Models from 450N to 630N
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles (only 450N), IP55, class F.
Model 630H, 710N and 710H
- Three-phase single-speed motor 400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
* When thermal protection are connected, the electrical installation must be equipped with a security system that, in case of fire, allows the maximum speed of the fans whatever the current state of the thermal protection.
** When using a speed controller, the electrical installation must be equipped with a security system that allows, in case of fire, the maximum speed of the fans.
Additional information
180N, 200N and 225N models are specially designed for extracting smokes from fireplaces.
Three-phase 2-speed motor 380-450V 50Hz, 6/12 poles (from 450N to 710H) on demand.
Range of centrifugal roof mounted fans in horizontal discharge format, designed for smoke extraction in fire conditions and certified F400-120 (1). Suitable for air stream temperature up to 120ºC.
- Base manufactured from galvanised sheet steel.
- High efficiency centrifugal backward curved impeller manufactured from galvanized sheet steel.
- Cowl manufactured from spun aluminium.
- All models incorporate bird-proof guard
- Available, depending on the model, in 4, 6 or 4/8 poles.
(1) Except 180 and 200 models
Motors
Models from 180N to 400N
- Single-phase, single-speed motor 220- 240V50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by voltage**.
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by frequency inverter and by voltage**.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles, IP55, class F, with safety thermal overload protection*.
Models from 450N to 630N
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles (only 450N), IP55, class F.
Model 630H, 710N and 710H
- Three-phase single-speed motor 400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
* When thermal protection are connected, the electrical installation must be equipped with a security system that, in case of fire, allows the maximum speed of the fans whatever the current state of the thermal protection.
** When using a speed controller, the electrical installation must be equipped with a security system that allows, in case of fire, the maximum speed of the fans.
Additional information
180N, 200N and 225N models are specially designed for extracting smokes from fireplaces.
Three-phase 2-speed motor 380-450V 50Hz, 6/12 poles (from 450N to 710H) on demand.
Range of centrifugal roof mounted fans in horizontal discharge format, designed for smoke extraction in fire conditions and certified F400-120 (1). Suitable for air stream temperature up to 120ºC.
- Base manufactured from galvanised sheet steel.
- High efficiency centrifugal backward curved impeller manufactured from galvanized sheet steel.
- Cowl manufactured from spun aluminium.
- All models incorporate bird-proof guard
- Available, depending on the model, in 4, 6 or 4/8 poles.
(1) Except 180 and 200 models
Motors
Models from 180N to 400N
- Single-phase, single-speed motor 220- 240V50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by voltage**.
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by frequency inverter and by voltage**.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles, IP55, class F, with safety thermal overload protection*.
Models from 450N to 630N
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles (only 450N), IP55, class F.
Model 630H, 710N and 710H
- Three-phase single-speed motor 400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
* When thermal protection are connected, the electrical installation must be equipped with a security system that, in case of fire, allows the maximum speed of the fans whatever the current state of the thermal protection.
** When using a speed controller, the electrical installation must be equipped with a security system that allows, in case of fire, the maximum speed of the fans.
Additional information
180N, 200N and 225N models are specially designed for extracting smokes from fireplaces.
Three-phase 2-speed motor 380-450V 50Hz, 6/12 poles (from 450N to 710H) on demand.
Range of centrifugal roof mounted fans in horizontal discharge format, designed for smoke extraction in fire conditions and certified F400-120 (1). Suitable for air stream temperature up to 120ºC.
- Base manufactured from galvanised sheet steel.
- High efficiency centrifugal backward curved impeller manufactured from galvanized sheet steel.
- Cowl manufactured from spun aluminium.
- All models incorporate bird-proof guard
- Available, depending on the model, in 4, 6 or 4/8 poles.
(1) Except 180 and 200 models
Motors
Models from 180N to 400N
- Single-phase, single-speed motor 220- 240V50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by voltage**.
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by frequency inverter and by voltage**.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles, IP55, class F, with safety thermal overload protection*.
Models from 450N to 630N
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles (only 450N), IP55, class F.
Model 630H, 710N and 710H
- Three-phase single-speed motor 400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
* When thermal protection are connected, the electrical installation must be equipped with a security system that, in case of fire, allows the maximum speed of the fans whatever the current state of the thermal protection.
** When using a speed controller, the electrical installation must be equipped with a security system that allows, in case of fire, the maximum speed of the fans.
Additional information
180N, 200N and 225N models are specially designed for extracting smokes from fireplaces.
Three-phase 2-speed motor 380-450V 50Hz, 6/12 poles (from 450N to 710H) on demand.
Range of centrifugal roof mounted fans in horizontal discharge format, designed for smoke extraction in fire conditions and certified F400-120 (1). Suitable for air stream temperature up to 120ºC.
- Base manufactured from galvanised sheet steel.
- High efficiency centrifugal backward curved impeller manufactured from galvanized sheet steel.
- Cowl manufactured from spun aluminium.
- All models incorporate bird-proof guard
- Available, depending on the model, in 4, 6 or 4/8 poles.
(1) Except 180 and 200 models
Motors
Models from 180N to 400N
- Single-phase, single-speed motor 220- 240V50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by voltage**.
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by frequency inverter and by voltage**.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles, IP55, class F, with safety thermal overload protection*.
Models from 450N to 630N
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles (only 450N), IP55, class F.
Model 630H, 710N and 710H
- Three-phase single-speed motor 400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
* When thermal protection are connected, the electrical installation must be equipped with a security system that, in case of fire, allows the maximum speed of the fans whatever the current state of the thermal protection.
** When using a speed controller, the electrical installation must be equipped with a security system that allows, in case of fire, the maximum speed of the fans.
Additional information
180N, 200N and 225N models are specially designed for extracting smokes from fireplaces.
Three-phase 2-speed motor 380-450V 50Hz, 6/12 poles (from 450N to 710H) on demand.
Range of centrifugal roof mounted fans in horizontal discharge format, designed for smoke extraction in fire conditions and certified F400-120 (1). Suitable for air stream temperature up to 120ºC.
- Base manufactured from galvanised sheet steel.
- High efficiency centrifugal backward curved impeller manufactured from galvanized sheet steel.
- Cowl manufactured from spun aluminium.
- All models incorporate bird-proof guard
- Available, depending on the model, in 4, 6 or 4/8 poles.
(1) Except 180 and 200 models
Motors
Models from 180N to 400N
- Single-phase, single-speed motor 220- 240V50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by voltage**.
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by frequency inverter and by voltage**.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles, IP55, class F, with safety thermal overload protection*.
Models from 450N to 630N
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles (only 450N), IP55, class F.
Model 630H, 710N and 710H
- Three-phase single-speed motor 400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
* When thermal protection are connected, the electrical installation must be equipped with a security system that, in case of fire, allows the maximum speed of the fans whatever the current state of the thermal protection.
** When using a speed controller, the electrical installation must be equipped with a security system that allows, in case of fire, the maximum speed of the fans.
Additional information
180N, 200N and 225N models are specially designed for extracting smokes from fireplaces.
Three-phase 2-speed motor 380-450V 50Hz, 6/12 poles (from 450N to 710H) on demand.
Range of centrifugal roof mounted fans in horizontal discharge format, designed for smoke extraction in fire conditions and certified F400-120 (1). Suitable for air stream temperature up to 120ºC.
- Base manufactured from galvanised sheet steel.
- High efficiency centrifugal backward curved impeller manufactured from galvanized sheet steel.
- Cowl manufactured from spun aluminium.
- All models incorporate bird-proof guard
- Available, depending on the model, in 4, 6 or 4/8 poles.
(1) Except 180 and 200 models
Motors
Models from 180N to 400N
- Single-phase, single-speed motor 220- 240V50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by voltage**.
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by frequency inverter and by voltage**.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles, IP55, class F, with safety thermal overload protection*.
Models from 450N to 630N
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles (only 450N), IP55, class F.
Model 630H, 710N and 710H
- Three-phase single-speed motor 400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
* When thermal protection are connected, the electrical installation must be equipped with a security system that, in case of fire, allows the maximum speed of the fans whatever the current state of the thermal protection.
** When using a speed controller, the electrical installation must be equipped with a security system that allows, in case of fire, the maximum speed of the fans.
Additional information
180N, 200N and 225N models are specially designed for extracting smokes from fireplaces.
Three-phase 2-speed motor 380-450V 50Hz, 6/12 poles (from 450N to 710H) on demand.
Range of centrifugal roof mounted fans in horizontal discharge format, designed for smoke extraction in fire conditions and certified F400-120 (1). Suitable for air stream temperature up to 120ºC.
- Base manufactured from galvanised sheet steel.
- High efficiency centrifugal backward curved impeller manufactured from galvanized sheet steel.
- Cowl manufactured from spun aluminium.
- All models incorporate bird-proof guard
- Available, depending on the model, in 4, 6 or 4/8 poles.
(1) Except 180 and 200 models
Motors
Models from 180N to 400N
- Single-phase, single-speed motor 220- 240V50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by voltage**.
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by frequency inverter and by voltage**.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles, IP55, class F, with safety thermal overload protection*.
Models from 450N to 630N
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles (only 450N), IP55, class F.
Model 630H, 710N and 710H
- Three-phase single-speed motor 400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
* When thermal protection are connected, the electrical installation must be equipped with a security system that, in case of fire, allows the maximum speed of the fans whatever the current state of the thermal protection.
** When using a speed controller, the electrical installation must be equipped with a security system that allows, in case of fire, the maximum speed of the fans.
Additional information
180N, 200N and 225N models are specially designed for extracting smokes from fireplaces.
Three-phase 2-speed motor 380-450V 50Hz, 6/12 poles (from 450N to 710H) on demand.
Range of centrifugal roof mounted fans in horizontal discharge format, designed for smoke extraction in fire conditions and certified F400-120 (1). Suitable for air stream temperature up to 120ºC.
- Base manufactured from galvanised sheet steel.
- High efficiency centrifugal backward curved impeller manufactured from galvanized sheet steel.
- Cowl manufactured from spun aluminium.
- All models incorporate bird-proof guard
- Available, depending on the model, in 4, 6 or 4/8 poles.
(1) Except 180 and 200 models
Motors
Models from 180N to 400N
- Single-phase, single-speed motor 220- 240V50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by voltage**.
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by frequency inverter and by voltage**.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles, IP55, class F, with safety thermal overload protection*.
Models from 450N to 630N
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles (only 450N), IP55, class F.
Model 630H, 710N and 710H
- Three-phase single-speed motor 400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
* When thermal protection are connected, the electrical installation must be equipped with a security system that, in case of fire, allows the maximum speed of the fans whatever the current state of the thermal protection.
** When using a speed controller, the electrical installation must be equipped with a security system that allows, in case of fire, the maximum speed of the fans.
Additional information
180N, 200N and 225N models are specially designed for extracting smokes from fireplaces.
Three-phase 2-speed motor 380-450V 50Hz, 6/12 poles (from 450N to 710H) on demand.
Range of centrifugal roof mounted fans in horizontal discharge format, designed for smoke extraction in fire conditions and certified F400-120 (1). Suitable for air stream temperature up to 120ºC.
- Base manufactured from galvanised sheet steel.
- High efficiency centrifugal backward curved impeller manufactured from galvanized sheet steel.
- Cowl manufactured from spun aluminium.
- All models incorporate bird-proof guard
- Available, depending on the model, in 4, 6 or 4/8 poles.
(1) Except 180 and 200 models
Motors
Models from 180N to 400N
- Single-phase, single-speed motor 220- 240V50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by voltage**.
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by frequency inverter and by voltage**.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles, IP55, class F, with safety thermal overload protection*.
Models from 450N to 630N
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles (only 450N), IP55, class F.
Model 630H, 710N and 710H
- Three-phase single-speed motor 400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
* When thermal protection are connected, the electrical installation must be equipped with a security system that, in case of fire, allows the maximum speed of the fans whatever the current state of the thermal protection.
** When using a speed controller, the electrical installation must be equipped with a security system that allows, in case of fire, the maximum speed of the fans.
Additional information
180N, 200N and 225N models are specially designed for extracting smokes from fireplaces.
Three-phase 2-speed motor 380-450V 50Hz, 6/12 poles (from 450N to 710H) on demand.
Range of centrifugal roof mounted fans in horizontal discharge format, designed for smoke extraction in fire conditions and certified F400-120 (1). Suitable for air stream temperature up to 120ºC.
- Base manufactured from galvanised sheet steel.
- High efficiency centrifugal backward curved impeller manufactured from galvanized sheet steel.
- Cowl manufactured from spun aluminium.
- All models incorporate bird-proof guard
- Available, depending on the model, in 4, 6 or 4/8 poles.
(1) Except 180 and 200 models
Motors
Models from 180N to 400N
- Single-phase, single-speed motor 220- 240V50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by voltage**.
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by frequency inverter and by voltage**.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles, IP55, class F, with safety thermal overload protection*.
Models from 450N to 630N
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles (only 450N), IP55, class F.
Model 630H, 710N and 710H
- Three-phase single-speed motor 400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
* When thermal protection are connected, the electrical installation must be equipped with a security system that, in case of fire, allows the maximum speed of the fans whatever the current state of the thermal protection.
** When using a speed controller, the electrical installation must be equipped with a security system that allows, in case of fire, the maximum speed of the fans.
Additional information
180N, 200N and 225N models are specially designed for extracting smokes from fireplaces.
Three-phase 2-speed motor 380-450V 50Hz, 6/12 poles (from 450N to 710H) on demand.
Range of centrifugal roof mounted fans in horizontal discharge format, designed for smoke extraction in fire conditions and certified F400-120 (1). Suitable for air stream temperature up to 120ºC.
- Base manufactured from galvanised sheet steel.
- High efficiency centrifugal backward curved impeller manufactured from galvanized sheet steel.
- Cowl manufactured from spun aluminium.
- All models incorporate bird-proof guard
- Available, depending on the model, in 4, 6 or 4/8 poles.
(1) Except 180 and 200 models
Motors
Models from 180N to 400N
- Single-phase, single-speed motor 220- 240V50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by voltage**.
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by frequency inverter and by voltage**.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles, IP55, class F, with safety thermal overload protection*.
Models from 450N to 630N
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles (only 450N), IP55, class F.
Model 630H, 710N and 710H
- Three-phase single-speed motor 400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
* When thermal protection are connected, the electrical installation must be equipped with a security system that, in case of fire, allows the maximum speed of the fans whatever the current state of the thermal protection.
** When using a speed controller, the electrical installation must be equipped with a security system that allows, in case of fire, the maximum speed of the fans.
Additional information
180N, 200N and 225N models are specially designed for extracting smokes from fireplaces.
Three-phase 2-speed motor 380-450V 50Hz, 6/12 poles (from 450N to 710H) on demand.
Range of centrifugal roof mounted fans in horizontal discharge format, designed for smoke extraction in fire conditions and certified F400-120 (1). Suitable for air stream temperature up to 120ºC.
- Base manufactured from galvanised sheet steel.
- High efficiency centrifugal backward curved impeller manufactured from galvanized sheet steel.
- Cowl manufactured from spun aluminium.
- All models incorporate bird-proof guard
- Available, depending on the model, in 4, 6 or 4/8 poles.
(1) Except 180 and 200 models
Motors
Models from 180N to 400N
- Single-phase, single-speed motor 220- 240V50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by voltage**.
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by frequency inverter and by voltage**.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles, IP55, class F, with safety thermal overload protection*.
Models from 450N to 630N
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles (only 450N), IP55, class F.
Model 630H, 710N and 710H
- Three-phase single-speed motor 400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
* When thermal protection are connected, the electrical installation must be equipped with a security system that, in case of fire, allows the maximum speed of the fans whatever the current state of the thermal protection.
** When using a speed controller, the electrical installation must be equipped with a security system that allows, in case of fire, the maximum speed of the fans.
Additional information
180N, 200N and 225N models are specially designed for extracting smokes from fireplaces.
Three-phase 2-speed motor 380-450V 50Hz, 6/12 poles (from 450N to 710H) on demand.
Range of centrifugal roof mounted fans in horizontal discharge format, designed for smoke extraction in fire conditions and certified F400-120 (1). Suitable for air stream temperature up to 120ºC.
- Base manufactured from galvanised sheet steel.
- High efficiency centrifugal backward curved impeller manufactured from galvanized sheet steel.
- Cowl manufactured from spun aluminium.
- All models incorporate bird-proof guard
- Available, depending on the model, in 4, 6 or 4/8 poles.
(1) Except 180 and 200 models
Motors
Models from 180N to 400N
- Single-phase, single-speed motor 220- 240V50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by voltage**.
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by frequency inverter and by voltage**.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles, IP55, class F, with safety thermal overload protection*.
Models from 450N to 630N
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles (only 450N), IP55, class F.
Model 630H, 710N and 710H
- Three-phase single-speed motor 400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
* When thermal protection are connected, the electrical installation must be equipped with a security system that, in case of fire, allows the maximum speed of the fans whatever the current state of the thermal protection.
** When using a speed controller, the electrical installation must be equipped with a security system that allows, in case of fire, the maximum speed of the fans.
Additional information
180N, 200N and 225N models are specially designed for extracting smokes from fireplaces.
Three-phase 2-speed motor 380-450V 50Hz, 6/12 poles (from 450N to 710H) on demand.
Range of centrifugal roof mounted fans in horizontal discharge format, designed for smoke extraction in fire conditions and certified F400-120 (1). Suitable for air stream temperature up to 120ºC.
- Base manufactured from galvanised sheet steel.
- High efficiency centrifugal backward curved impeller manufactured from galvanized sheet steel.
- Cowl manufactured from spun aluminium.
- All models incorporate bird-proof guard
- Available, depending on the model, in 4, 6 or 4/8 poles.
(1) Except 180 and 200 models
Motors
Models from 180N to 400N
- Single-phase, single-speed motor 220- 240V50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by voltage**.
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by frequency inverter and by voltage**.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles, IP55, class F, with safety thermal overload protection*.
Models from 450N to 630N
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles (only 450N), IP55, class F.
Model 630H, 710N and 710H
- Three-phase single-speed motor 400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
* When thermal protection are connected, the electrical installation must be equipped with a security system that, in case of fire, allows the maximum speed of the fans whatever the current state of the thermal protection.
** When using a speed controller, the electrical installation must be equipped with a security system that allows, in case of fire, the maximum speed of the fans.
Additional information
180N, 200N and 225N models are specially designed for extracting smokes from fireplaces.
Three-phase 2-speed motor 380-450V 50Hz, 6/12 poles (from 450N to 710H) on demand.
Range of centrifugal roof mounted fans in horizontal discharge format, designed for smoke extraction in fire conditions and certified F400-120 (1). Suitable for air stream temperature up to 120ºC.
- Base manufactured from galvanised sheet steel.
- High efficiency centrifugal backward curved impeller manufactured from galvanized sheet steel.
- Cowl manufactured from spun aluminium.
- All models incorporate bird-proof guard
- Available, depending on the model, in 4, 6 or 4/8 poles.
(1) Except 180 and 200 models
Motors
Models from 180N to 400N
- Single-phase, single-speed motor 220- 240V50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by voltage**.
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by frequency inverter and by voltage**.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles, IP55, class F, with safety thermal overload protection*.
Models from 450N to 630N
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles (only 450N), IP55, class F.
Model 630H, 710N and 710H
- Three-phase single-speed motor 400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
* When thermal protection are connected, the electrical installation must be equipped with a security system that, in case of fire, allows the maximum speed of the fans whatever the current state of the thermal protection.
** When using a speed controller, the electrical installation must be equipped with a security system that allows, in case of fire, the maximum speed of the fans.
Additional information
180N, 200N and 225N models are specially designed for extracting smokes from fireplaces.
Three-phase 2-speed motor 380-450V 50Hz, 6/12 poles (from 450N to 710H) on demand.
Range of centrifugal roof mounted fans in horizontal discharge format, designed for smoke extraction in fire conditions and certified F400-120 (1). Suitable for air stream temperature up to 120ºC.
- Base manufactured from galvanised sheet steel.
- High efficiency centrifugal backward curved impeller manufactured from galvanized sheet steel.
- Cowl manufactured from spun aluminium.
- All models incorporate bird-proof guard
- Available, depending on the model, in 4, 6 or 4/8 poles.
(1) Except 180 and 200 models
Motors
Models from 180N to 400N
- Single-phase, single-speed motor 220- 240V50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by voltage**.
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by frequency inverter and by voltage**.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles, IP55, class F, with safety thermal overload protection*.
Models from 450N to 630N
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles (only 450N), IP55, class F.
Model 630H, 710N and 710H
- Three-phase single-speed motor 400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
* When thermal protection are connected, the electrical installation must be equipped with a security system that, in case of fire, allows the maximum speed of the fans whatever the current state of the thermal protection.
** When using a speed controller, the electrical installation must be equipped with a security system that allows, in case of fire, the maximum speed of the fans.
Additional information
180N, 200N and 225N models are specially designed for extracting smokes from fireplaces.
Three-phase 2-speed motor 380-450V 50Hz, 6/12 poles (from 450N to 710H) on demand.
Range of centrifugal roof mounted fans in horizontal discharge format, designed for smoke extraction in fire conditions and certified F400-120 (1). Suitable for air stream temperature up to 120ºC.
- Base manufactured from galvanised sheet steel.
- High efficiency centrifugal backward curved impeller manufactured from galvanized sheet steel.
- Cowl manufactured from spun aluminium.
- All models incorporate bird-proof guard
- Available, depending on the model, in 4, 6 or 4/8 poles.
(1) Except 180 and 200 models
Motors
Models from 180N to 400N
- Single-phase, single-speed motor 220- 240V50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by voltage**.
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by frequency inverter and by voltage**.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles, IP55, class F, with safety thermal overload protection*.
Models from 450N to 630N
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles (only 450N), IP55, class F.
Model 630H, 710N and 710H
- Three-phase single-speed motor 400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
* When thermal protection are connected, the electrical installation must be equipped with a security system that, in case of fire, allows the maximum speed of the fans whatever the current state of the thermal protection.
** When using a speed controller, the electrical installation must be equipped with a security system that allows, in case of fire, the maximum speed of the fans.
Additional information
180N, 200N and 225N models are specially designed for extracting smokes from fireplaces.
Three-phase 2-speed motor 380-450V 50Hz, 6/12 poles (from 450N to 710H) on demand.
Range of centrifugal roof mounted fans in horizontal discharge format, designed for smoke extraction in fire conditions and certified F400-120 (1). Suitable for air stream temperature up to 120ºC.
- Base manufactured from galvanised sheet steel.
- High efficiency centrifugal backward curved impeller manufactured from galvanized sheet steel.
- Cowl manufactured from spun aluminium.
- All models incorporate bird-proof guard
- Available, depending on the model, in 4, 6 or 4/8 poles.
(1) Except 180 and 200 models
Motors
Models from 180N to 400N
- Single-phase, single-speed motor 220- 240V50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by voltage**.
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by frequency inverter and by voltage**.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles, IP55, class F, with safety thermal overload protection*.
Models from 450N to 630N
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles (only 450N), IP55, class F.
Model 630H, 710N and 710H
- Three-phase single-speed motor 400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
* When thermal protection are connected, the electrical installation must be equipped with a security system that, in case of fire, allows the maximum speed of the fans whatever the current state of the thermal protection.
** When using a speed controller, the electrical installation must be equipped with a security system that allows, in case of fire, the maximum speed of the fans.
Additional information
180N, 200N and 225N models are specially designed for extracting smokes from fireplaces.
Three-phase 2-speed motor 380-450V 50Hz, 6/12 poles (from 450N to 710H) on demand.
Range of centrifugal roof mounted fans in horizontal discharge format, designed for smoke extraction in fire conditions and certified F400-120 (1). Suitable for air stream temperature up to 120ºC.
- Base manufactured from galvanised sheet steel.
- High efficiency centrifugal backward curved impeller manufactured from galvanized sheet steel.
- Cowl manufactured from spun aluminium.
- All models incorporate bird-proof guard
- Available, depending on the model, in 4, 6 or 4/8 poles.
(1) Except 180 and 200 models
Motors
Models from 180N to 400N
- Single-phase, single-speed motor 220- 240V50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by voltage**.
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by frequency inverter and by voltage**.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles, IP55, class F, with safety thermal overload protection*.
Models from 450N to 630N
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles (only 450N), IP55, class F.
Model 630H, 710N and 710H
- Three-phase single-speed motor 400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
* When thermal protection are connected, the electrical installation must be equipped with a security system that, in case of fire, allows the maximum speed of the fans whatever the current state of the thermal protection.
** When using a speed controller, the electrical installation must be equipped with a security system that allows, in case of fire, the maximum speed of the fans.
Additional information
180N, 200N and 225N models are specially designed for extracting smokes from fireplaces.
Three-phase 2-speed motor 380-450V 50Hz, 6/12 poles (from 450N to 710H) on demand.
Range of centrifugal roof mounted fans in horizontal discharge format, designed for smoke extraction in fire conditions and certified F400-120 (1). Suitable for air stream temperature up to 120ºC.
- Base manufactured from galvanised sheet steel.
- High efficiency centrifugal backward curved impeller manufactured from galvanized sheet steel.
- Cowl manufactured from spun aluminium.
- All models incorporate bird-proof guard
- Available, depending on the model, in 4, 6 or 4/8 poles.
(1) Except 180 and 200 models
Motors
Models from 180N to 400N
- Single-phase, single-speed motor 220- 240V50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by voltage**.
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by frequency inverter and by voltage**.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles, IP55, class F, with safety thermal overload protection*.
Models from 450N to 630N
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles (only 450N), IP55, class F.
Model 630H, 710N and 710H
- Three-phase single-speed motor 400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
* When thermal protection are connected, the electrical installation must be equipped with a security system that, in case of fire, allows the maximum speed of the fans whatever the current state of the thermal protection.
** When using a speed controller, the electrical installation must be equipped with a security system that allows, in case of fire, the maximum speed of the fans.
Additional information
180N, 200N and 225N models are specially designed for extracting smokes from fireplaces.
Three-phase 2-speed motor 380-450V 50Hz, 6/12 poles (from 450N to 710H) on demand.
Range of centrifugal roof mounted fans in horizontal discharge format, designed for smoke extraction in fire conditions and certified F400-120 (1). Suitable for air stream temperature up to 120ºC.
- Base manufactured from galvanised sheet steel.
- High efficiency centrifugal backward curved impeller manufactured from galvanized sheet steel.
- Cowl manufactured from spun aluminium.
- All models incorporate bird-proof guard
- Available, depending on the model, in 4, 6 or 4/8 poles.
(1) Except 180 and 200 models
Motors
Models from 180N to 400N
- Single-phase, single-speed motor 220- 240V50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by voltage**.
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by frequency inverter and by voltage**.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles, IP55, class F, with safety thermal overload protection*.
Models from 450N to 630N
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles (only 450N), IP55, class F.
Model 630H, 710N and 710H
- Three-phase single-speed motor 400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
* When thermal protection are connected, the electrical installation must be equipped with a security system that, in case of fire, allows the maximum speed of the fans whatever the current state of the thermal protection.
** When using a speed controller, the electrical installation must be equipped with a security system that allows, in case of fire, the maximum speed of the fans.
Additional information
180N, 200N and 225N models are specially designed for extracting smokes from fireplaces.
Three-phase 2-speed motor 380-450V 50Hz, 6/12 poles (from 450N to 710H) on demand.
Range of centrifugal roof mounted fans in horizontal discharge format, designed for smoke extraction in fire conditions and certified F400-120 (1). Suitable for air stream temperature up to 120ºC.
- Base manufactured from galvanised sheet steel.
- High efficiency centrifugal backward curved impeller manufactured from galvanized sheet steel.
- Cowl manufactured from spun aluminium.
- All models incorporate bird-proof guard
- Available, depending on the model, in 4, 6 or 4/8 poles.
(1) Except 180 and 200 models
Motors
Models from 180N to 400N
- Single-phase, single-speed motor 220- 240V50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by voltage**.
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by frequency inverter and by voltage**.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles, IP55, class F, with safety thermal overload protection*.
Models from 450N to 630N
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles (only 450N), IP55, class F.
Model 630H, 710N and 710H
- Three-phase single-speed motor 400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
* When thermal protection are connected, the electrical installation must be equipped with a security system that, in case of fire, allows the maximum speed of the fans whatever the current state of the thermal protection.
** When using a speed controller, the electrical installation must be equipped with a security system that allows, in case of fire, the maximum speed of the fans.
Additional information
180N, 200N and 225N models are specially designed for extracting smokes from fireplaces.
Three-phase 2-speed motor 380-450V 50Hz, 6/12 poles (from 450N to 710H) on demand.
Range of centrifugal roof mounted fans in horizontal discharge format, designed for smoke extraction in fire conditions and certified F400-120 (1). Suitable for air stream temperature up to 120ºC.
- Base manufactured from galvanised sheet steel.
- High efficiency centrifugal backward curved impeller manufactured from galvanized sheet steel.
- Cowl manufactured from spun aluminium.
- All models incorporate bird-proof guard
- Available, depending on the model, in 4, 6 or 4/8 poles.
(1) Except 180 and 200 models
Motors
Models from 180N to 400N
- Single-phase, single-speed motor 220- 240V50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by voltage**.
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by frequency inverter and by voltage**.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles, IP55, class F, with safety thermal overload protection*.
Models from 450N to 630N
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles (only 450N), IP55, class F.
Model 630H, 710N and 710H
- Three-phase single-speed motor 400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
* When thermal protection are connected, the electrical installation must be equipped with a security system that, in case of fire, allows the maximum speed of the fans whatever the current state of the thermal protection.
** When using a speed controller, the electrical installation must be equipped with a security system that allows, in case of fire, the maximum speed of the fans.
Additional information
180N, 200N and 225N models are specially designed for extracting smokes from fireplaces.
Three-phase 2-speed motor 380-450V 50Hz, 6/12 poles (from 450N to 710H) on demand.
Range of centrifugal roof mounted fans in horizontal discharge format, designed for smoke extraction in fire conditions and certified F400-120 (1). Suitable for air stream temperature up to 120ºC.
- Base manufactured from galvanised sheet steel.
- High efficiency centrifugal backward curved impeller manufactured from galvanized sheet steel.
- Cowl manufactured from spun aluminium.
- All models incorporate bird-proof guard
- Available, depending on the model, in 4, 6 or 4/8 poles.
(1) Except 180 and 200 models
Motors
Models from 180N to 400N
- Single-phase, single-speed motor 220- 240V50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by voltage**.
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by frequency inverter and by voltage**.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles, IP55, class F, with safety thermal overload protection*.
Models from 450N to 630N
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles (only 450N), IP55, class F.
Model 630H, 710N and 710H
- Three-phase single-speed motor 400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
* When thermal protection are connected, the electrical installation must be equipped with a security system that, in case of fire, allows the maximum speed of the fans whatever the current state of the thermal protection.
** When using a speed controller, the electrical installation must be equipped with a security system that allows, in case of fire, the maximum speed of the fans.
Additional information
180N, 200N and 225N models are specially designed for extracting smokes from fireplaces.
Three-phase 2-speed motor 380-450V 50Hz, 6/12 poles (from 450N to 710H) on demand.
Range of centrifugal roof mounted fans in horizontal discharge format, designed for smoke extraction in fire conditions and certified F400-120 (1). Suitable for air stream temperature up to 120ºC.
- Base manufactured from galvanised sheet steel.
- High efficiency centrifugal backward curved impeller manufactured from galvanized sheet steel.
- Cowl manufactured from spun aluminium.
- All models incorporate bird-proof guard
- Available, depending on the model, in 4, 6 or 4/8 poles.
(1) Except 180 and 200 models
Motors
Models from 180N to 400N
- Single-phase, single-speed motor 220- 240V50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by voltage**.
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by frequency inverter and by voltage**.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles, IP55, class F, with safety thermal overload protection*.
Models from 450N to 630N
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles (only 450N), IP55, class F.
Model 630H, 710N and 710H
- Three-phase single-speed motor 400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
* When thermal protection are connected, the electrical installation must be equipped with a security system that, in case of fire, allows the maximum speed of the fans whatever the current state of the thermal protection.
** When using a speed controller, the electrical installation must be equipped with a security system that allows, in case of fire, the maximum speed of the fans.
Additional information
180N, 200N and 225N models are specially designed for extracting smokes from fireplaces.
Three-phase 2-speed motor 380-450V 50Hz, 6/12 poles (from 450N to 710H) on demand.
Range of centrifugal roof mounted fans in horizontal discharge format, designed for smoke extraction in fire conditions and certified F400-120 (1). Suitable for air stream temperature up to 120ºC.
- Base manufactured from galvanised sheet steel.
- High efficiency centrifugal backward curved impeller manufactured from galvanized sheet steel.
- Cowl manufactured from spun aluminium.
- All models incorporate bird-proof guard
- Available, depending on the model, in 4, 6 or 4/8 poles.
(1) Except 180 and 200 models
Motors
Models from 180N to 400N
- Single-phase, single-speed motor 220- 240V50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by voltage**.
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by frequency inverter and by voltage**.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles, IP55, class F, with safety thermal overload protection*.
Models from 450N to 630N
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles (only 450N), IP55, class F.
Model 630H, 710N and 710H
- Three-phase single-speed motor 400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
* When thermal protection are connected, the electrical installation must be equipped with a security system that, in case of fire, allows the maximum speed of the fans whatever the current state of the thermal protection.
** When using a speed controller, the electrical installation must be equipped with a security system that allows, in case of fire, the maximum speed of the fans.
Additional information
180N, 200N and 225N models are specially designed for extracting smokes from fireplaces.
Three-phase 2-speed motor 380-450V 50Hz, 6/12 poles (from 450N to 710H) on demand.
Range of centrifugal roof mounted fans in horizontal discharge format, designed for smoke extraction in fire conditions and certified F400-120 (1). Suitable for air stream temperature up to 120ºC.
- Base manufactured from galvanised sheet steel.
- High efficiency centrifugal backward curved impeller manufactured from galvanized sheet steel.
- Cowl manufactured from spun aluminium.
- All models incorporate bird-proof guard
- Available, depending on the model, in 4, 6 or 4/8 poles.
(1) Except 180 and 200 models
Motors
Models from 180N to 400N
- Single-phase, single-speed motor 220- 240V50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by voltage**.
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by frequency inverter and by voltage**.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles, IP55, class F, with safety thermal overload protection*.
Models from 450N to 630N
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles (only 450N), IP55, class F.
Model 630H, 710N and 710H
- Three-phase single-speed motor 400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
* When thermal protection are connected, the electrical installation must be equipped with a security system that, in case of fire, allows the maximum speed of the fans whatever the current state of the thermal protection.
** When using a speed controller, the electrical installation must be equipped with a security system that allows, in case of fire, the maximum speed of the fans.
Additional information
180N, 200N and 225N models are specially designed for extracting smokes from fireplaces.
Three-phase 2-speed motor 380-450V 50Hz, 6/12 poles (from 450N to 710H) on demand.
Range of centrifugal roof mounted fans in horizontal discharge format, designed for smoke extraction in fire conditions and certified F400-120 (1). Suitable for air stream temperature up to 120ºC.
- Base manufactured from galvanised sheet steel.
- High efficiency centrifugal backward curved impeller manufactured from galvanized sheet steel.
- Cowl manufactured from spun aluminium.
- All models incorporate bird-proof guard
- Available, depending on the model, in 4, 6 or 4/8 poles.
(1) Except 180 and 200 models
Motors
Models from 180N to 400N
- Single-phase, single-speed motor 220- 240V50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by voltage**.
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by frequency inverter and by voltage**.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles, IP55, class F, with safety thermal overload protection*.
Models from 450N to 630N
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles (only 450N), IP55, class F.
Model 630H, 710N and 710H
- Three-phase single-speed motor 400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
* When thermal protection are connected, the electrical installation must be equipped with a security system that, in case of fire, allows the maximum speed of the fans whatever the current state of the thermal protection.
** When using a speed controller, the electrical installation must be equipped with a security system that allows, in case of fire, the maximum speed of the fans.
Additional information
180N, 200N and 225N models are specially designed for extracting smokes from fireplaces.
Three-phase 2-speed motor 380-450V 50Hz, 6/12 poles (from 450N to 710H) on demand.
Range of centrifugal roof mounted fans in horizontal discharge format, designed for smoke extraction in fire conditions and certified F400-120 (1). Suitable for air stream temperature up to 120ºC.
- Base manufactured from galvanised sheet steel.
- High efficiency centrifugal backward curved impeller manufactured from galvanized sheet steel.
- Cowl manufactured from spun aluminium.
- All models incorporate bird-proof guard
- Available, depending on the model, in 4, 6 or 4/8 poles.
(1) Except 180 and 200 models
Motors
Models from 180N to 400N
- Single-phase, single-speed motor 220- 240V50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by voltage**.
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by frequency inverter and by voltage**.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles, IP55, class F, with safety thermal overload protection*.
Models from 450N to 630N
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles (only 450N), IP55, class F.
Model 630H, 710N and 710H
- Three-phase single-speed motor 400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
* When thermal protection are connected, the electrical installation must be equipped with a security system that, in case of fire, allows the maximum speed of the fans whatever the current state of the thermal protection.
** When using a speed controller, the electrical installation must be equipped with a security system that allows, in case of fire, the maximum speed of the fans.
Additional information
180N, 200N and 225N models are specially designed for extracting smokes from fireplaces.
Three-phase 2-speed motor 380-450V 50Hz, 6/12 poles (from 450N to 710H) on demand.
Range of centrifugal roof mounted fans in horizontal discharge format, designed for smoke extraction in fire conditions and certified F400-120 (1). Suitable for air stream temperature up to 120ºC.
- Base manufactured from galvanised sheet steel.
- High efficiency centrifugal backward curved impeller manufactured from galvanized sheet steel.
- Cowl manufactured from spun aluminium.
- All models incorporate bird-proof guard
- Available, depending on the model, in 4, 6 or 4/8 poles.
(1) Except 180 and 200 models
Motors
Models from 180N to 400N
- Single-phase, single-speed motor 220- 240V50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by voltage**.
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F, with safety thermal overload protection*. Speed controllable by frequency inverter and by voltage**.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles, IP55, class F, with safety thermal overload protection*.
Models from 450N to 630N
- Three-phase single-speed motor 220-240/400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
- Three-phase 2-speed motor 380- 4150V50Hz, 4/8 poles (only 450N), IP55, class F.
Model 630H, 710N and 710H
- Three-phase single-speed motor 400-415V-50Hz, IP55, class F. Speed controllable by frequency inverter*.
* When thermal protection are connected, the electrical installation must be equipped with a security system that, in case of fire, allows the maximum speed of the fans whatever the current state of the thermal protection.
** When using a speed controller, the electrical installation must be equipped with a security system that allows, in case of fire, the maximum speed of the fans.
Additional information
180N, 200N and 225N models are specially designed for extracting smokes from fireplaces.
Three-phase 2-speed motor 380-450V 50Hz, 6/12 poles (from 450N to 710H) on demand.