Share on Facebook
Tweet
Send emailCabinet
The cabinet is made of stainless steel sheet. A stainless steel square flange is attached to the cabinet for connection to the chimney flue. The fan is designed for outdoor installation.
Running wheel
The impeller is radial with forward curved blades, made of galvanized steel plate. It is statically and dynamically balanced.
Motor
The motor is asynchronous with short armature and is designed for continuous operation. The motor contains grease-filled ball bearings for life. The motor is not located in the exhaust stream. Protection rating IP 34.
Screwdriver
The terminal box is mounted on the fan housing as standard. Cable connection is possible by removing the terminal cover from the underside of the motor housing.
El. connection
El. cable connection to the fan terminal box. The fan is designed for fixed mounting. Supply voltage 230 V / 50 Hz.
Speed control
Speed control is carried out by electronic speed controllers by changing the voltage.
Mounting
The fan is mounted on the chimney casing with four screws, which are not included.
Instructions
The flue fan creates a vacuum in the chimney flue thanks to the included injector. The fan improves the draft of the chimney regardless of its effective height, wind speed or other environmental influences. The fan motor is located outside the flue gas stream. The fan is designed in such a way that its installation does not close the chimney flue. The maximum operating temperature of the fan is 400 °C.
Notice
The location of the fan and the construction of the chimney (or flue) must be carried out in accordance with the applicable technical standards and regulations. Emphasis must be placed on the fire safety of the chimney and flue, in particular their regular inspection and cleaning frequency. From the point of view of fire prevention, everyone is obliged to ensure that the operation of the chimney, flue and fuel appliance does not lead to fire. Furthermore, the Air Protection Act prohibits the use of waste as fuel. Inspections and checks of the entire system, including installation checks, must only be carried out by an authorised competent person.
