Share on Facebook
Tweet
Send emailCabinet
It is made of shock-resistant plastic, white colour. The cabinet is designed for wall or ceiling mounting. There is a return flap in the fan discharge.
Running wheel
is radial with forward curved blades and is statically and dynamically balanced.
Motor
is asynchronous with a start-up capacitor. The motor has thermal protection against overheating. The maximum operating ambient temperature is 40°C. Double insulated design, protection class II, IP44.
Square box
Accessible by removing the front grille and terminal box cover, connection under plaster or cable on plaster. The terminal block includes a relief clip to prevent the cable from being pulled out.
Speed control
For S and T types with the REB variable speed controller.
Noise
emitted by the fan is measured at a distance of 1.5 m.
Mounting
is carried out on the wall using the paper mounting template supplied. Dowels and screws are also included. When the front grille is removed, the fan is automatically switched off by the built-in safety switch. During installation, we recommend flexible pads under the fan mounting points to reduce noise transmission through the building structure.
Options
- S basic version
- T time 1-30 minutes
- M control with pull switch
- HM with hygrostat and pull switch
- DV with pull switch
Instructions
Ventilators are suitable for relatively long ducts with higher pressure drop or for direct through-wall ventilation. The fans can be used for ventilation in residential construction, in conjunction with a HIG 2 hygrostat or with a hygrostat combined with a thermostat for ventilation of wet areas.
