COR-12-1500 FT air curtain (without grilles)

Cabinet

The cabinet is made of galvanized steel sheet. The ceiling grid is made of steel and is powder coated (white, black or natural anodised). On request, it can be supplied in any RAL shade. The grid must be ordered separately.

Fans

Special quiet tangential fans are used in the door screens.

Motor

The motor is asynchronous with short armature.

Heater

The heater is electric.

Electric connection

The electrical connection is made to the internal terminal block in the door screen housing. All models are equipped with thermal protection as standard.

Regulation

Door screen control with el. The controller can be used to switch the speed in 3 stages and the heater power in 2 stages (full and ½ power). It is possible to connect an external thermostat (not included) for automatic operation. operation. Up to 5 identical apertures can be connected to 1 controller when multiple apertures are arranged side by side.

Noise

All models feature low noise levels due to the balanced impeller.

Variants

- COR-F-1000 FT - without heater
- COR-F-1500 FT - without heater
- COR-6-1000 FT - with el. 6 kW heater
- COR-9-1000 FT - with el. 9 kW heater
- COR-9-1500 FT - with el. 9 kW heater
- COR-12-1500 FT - with el. 12 kW
- COR-1000 FTW 10 - with water heater 10 kW
- COR-1500 FTW 17 - with water heater 17 kW

Mounting

Clones are mounted in the ceiling. The minimum height should be 2.5 m and the maximum 3 m above the floor. The distance from the walls must be at least 100 mm.

Information

An air door screen in a compact design with easy ceiling mounting suitable for small commercial premises. Multiple screens can be arranged side by side if required. The ceiling grid must be ordered separately.