Share on Facebook
Tweet
Send email
Cabinet
It is made of galvanized steel sheet. The cabinet is fitted with a 50 mm layer of soundproofing material inside. The enclosure has circular spigots with single-edge seals for connecting flexible hoses or circular pipes.
Running wheel
is radial with forward curved vanes. The impeller is pressed directly onto the outer rotor of the motor.
Motor
is asynchronous, with an outer rotor. Depending on the type, the motors are with or without a starting capacitor. The thermal fuse is located in the motor winding. Insulation class B, protection IP44 (CAB 100-250 N), insulation class F, protection IP44 (CAB 315 RE), insulation class F, protection IP55 (CAB 355 RE, CAB 400 RE).
Clamps
is loosely mounted on the cable to facilitate installation. Depending on the fan type, it has a capacitor holder. IP55 protection.
Speed control
is carried out by electronic or transformer controllers.
Mounting
is also possible outdoors in any position of the motor axis. The enclosure must not transmit mechanical stresses from the pipework. A flexible connection to the pipework must be used.
Instructions
Fans are designed for ventilation of houses, social facilities, offices and premises. Conveniently, when installed in the soffit, flex-headers, fittings, junction boxes and plate valves can be used. The fans can be used in conjunction with a HIG 2 hygrostat or a hygrostat combined with a thermostat to ventilate wet areas.
